Q45BB6R BANNER ENGINEERING, Q45BB6R Datasheet - Page 12

• Manufacturer Part Number: Q45BB6R
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Opposed Moder

Specifications of Q45BB6R

• Output Current: 250mA
• Sensor Output: NPN/PNP
• Supply Voltage Range Dc: 10V To 30V
• Sensor Housing: Rectangular
• Sensor Input: Optical
• Output Type: Transistor
• Sensing Range Max: 60m
• Switch Terminals: Cable
• Brand/series: Q45BB6
• Current, Switching: 150 mA
• Ip Rating: IP67
• Length, Cable: 2 m
• Light Source: LED
• Material, Housing: Thermoplastic Polyester
• Material, Lens: Acrylic
• Mounting Type: Threaded
• Output: NPN/PNP
• Primary Type: Photoelectric
• Range, Measurement: 60 mm
• Response Time: 2 ms (ON),1 ms (OFF)
• Sensing Mode: Opposed
• Standards: UL Listed, CSA Certified, CE Marked
• Technology: Photoelectric
• Temperature, Operating: -40 to +70 °C
• Termination: 4-Wire Cable
• Voltage, Supply: 30 VDC
• Operating Temperature: –40°C to 70°C
• Lead Free Status / Rohs Status: RoHS Exempt Product

Q45BB6 Series
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: [phone] • www.bannerengineering.com • E-mail: [e-mail]
tions. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner
Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any
other warranty either expressed or implied.
!
WARNING . . .
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applica-
Not To Be Used for Personnel Protection