QS18UPAE BANNER ENGINEERING, QS18UPAE Datasheet - Page 2

• Manufacturer Part Number: QS18UPAE
• Description: Ultrasonic Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Ultrasonicr

Specifications of QS18UPAE

• Sensing Range Min: 50mm
• Sensing Range Max: 500mm
• Switching Frequency: 300kHz
• Operating Temperature Range: -20°C To +60°C
• Supply Voltage: 30VDC
• Sensor Terminals: Cable
• Control Output Type: PNP
• Frequency: 300kHz
• Body Style: Miniature
• Brand/series: World-Beam®
• Current, Switching: 100 mA
• Function: Proximity
• Ip Rating: IP68
• Mounting Type: Threaded
• Output: PNP, SPST
• Primary Type: Proximity
• Range, Measurement: 500 mm
• Technology: Ultrasonic
• Termination: 4-Wire Cable
• Voltage, Supply: 30 VDC
• Accessories Available: Cordsets, Brackets and Wave Guide
• Sensor Output: PNP

Sensing Range
Supply Voltage
Ultrasonic Frequency
Supply Protection
Circuitry
Output Configuration
Output Protection
Output Ratings
Output Response Time
Delay at Power-Up
Temperature Effect
Repeatability
Minimum Window Size
Hysteresis
Adjustments
Indicators
Construction
Operating Conditions
Connections
Environmental Rating
Vibration and
Mechanical Shock
Temperature Warmup
Drift
Application Notes
Certifications
50 to 500 mm (2" to 20")
12 to 30V dc (10% maximum ripple); 25 mA max. (exclusive of load)
300 kHz, rep. rate 7.5 ms
Protected against reverse polarity and transient voltages
SPST solid-state switch conducts when target is sensed within sensing window; one NPN (current sinking) or one
PNP (current sourcing), depending on model.
Protected against short circuit conditions
100 mA maximum
OFF-state leakage current: < 10 microamps (sourcing); < 200 microamp (sinking)
NPN saturation: < 1.6V @ 100 mA
PNP saturation: < 2.0V @ 100 mA
15 milliseconds
300 milliseconds
Non-encapsulated models: ± 0.05% per °C from -20° to +50° C, ± 0.1% per °C from +50° to +60° C
Encapsulated models: ± 0.05% per °C from 0° to +60° C, ± 0.1% per °C from -20° to 0° C
0.7 mm
5 mm
1.4 mm
Sensing window limits: TEACH-Mode programming of near and far window limits may be set using the push button
or remotely via TEACH input (see page 3).
Range Indicator (Red/Green)
Green — Target is within sensing range
Red — Target is outside sensing range
OFF — Sensing power is OFF
Housing: ABS
Push Button: TPE
Temperature: -20° to +60° C (-4° to +140° F)
Maximum relative humidity: 100%, non-condensing
2 m (6.5') or 9 m (30') 4-conductor PVC jacketed attached cable or 4-pin Euro-style integral QD (Q8), or
4-pin Pico-style integral QD (Q7), or 4-pin Euro-style 150 mm (6") pigtail QD (Q5), or 4-pin Pico-style 150 mm (6")
pigtail QD (Q)
Leakproof design, rated NEMA 6P; IEC IP67 or IP68, depending on model (see page 1)
All models meet Mil. Std. 202F requirements method 201A (vibration: 10 to 60 Hz max., double amplitude 0.06",
maximum acceleration 10G). Also meets IEC 947-5-2 requirements: 30G 11 ms duration, half sine wave.
See Temperature Compensation, page 2
Objects passing inside the specified near limit may produce a false response.
Approvals are pending
Specifications
®
Teach/Output Indicator (Yellow/Red)
Yellow — Target is within taught limits
OFF — Target is outside taught window limits
Red — Sensor is in TEACH mode
Push Button Housing: ABS
Lightpipes: Polycarbonate