165X14819XE Conec, 165X14819XE Datasheet
![CONN HOOD DSUB 9POS IP67 BLACK](/photos/2/78/27844/165x14819xe_sml.jpg)
165X14819XE
Manufacturer Part Number
165X14819XE
Description
CONN HOOD DSUB 9POS IP67 BLACK
Manufacturer
Conec
Series
165Xr
Specifications of 165X14819XE
Accessory Type
One Piece Backshell
Number Of Positions
9
Cable Type
Round
Cable Exit
180°
Shielding
Unshielded
Hardware
Cable Clamp
Features
Mating Screws, Sealed
Color
Black
Product
Standard Hoods & Connectors
Number Of Positions / Contacts
9
Current Rating
5 A
Contact Plating
Gold over Nickel
Shell Plating
Tin
Mounting Angle
Straight
Contact Material
Copper Alloy
Operating Temperature Range
- 40 C to + 105 C
Voltage Rating
125 V
For Use With
626-1094 - CONN DSUB COMBO 2POS 2W2C PLUG626-1093 - CONN DSUB COMBO 2POS 2W2C SOCKET626-1080 - CONN DSUB HD 15POS RECEPT CRIMP626-1077 - CONN DSUB HD 15POS PLUG CRIMP626-1068 - CONN DSUB 9POS RECEPT CRIMP626-1063 - CONN DSUB 9POS PLUG CRIMP
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Plating
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
626-1173
Installation Procedure For Resistant Hoods
Assembly steps:
1. Hold connector shell in the position shown on the picture. The holes of the shell have to be placed over the screws in the
hood. Attention: Do not push the shell further into the hood to avoid damaging the detent latches in the hood.
2. Place the assembly key between the connector shell and the hood over the detent latch. Gently pry open the hood while
pushing the connector down into the slot behind the detent latch. Remove the assembly key.
3. Verify that the shell is positioned behind the detent latch on one side of the hood. Place the assembly key between the
opposite side of the connector shell and the hood over the detent latch. Gently pry open the hood while pushing the connector
down into the slot behind the detent latch.
4. Remove the assembly key. Verify that the shell is placed in both slots behind the detent latches.