XF2J-2624-11A Omron, XF2J-2624-11A Datasheet - Page 24
![CONN FPC 26POS 0.5MM PITCH SMD](/photos/2/87/28798/xf2j-2624-11a_sml.jpg)
XF2J-2624-11A
Manufacturer Part Number
XF2J-2624-11A
Description
CONN FPC 26POS 0.5MM PITCH SMD
Manufacturer
Omron
Series
XF2Jr
Specifications of XF2J-2624-11A
Contact Plating
Gold
Connector Type
Vertical Contacts, 1 Sided
Number Of Positions
26
Pitch
0.020" (0.50mm)
Ffc, Fcb Thickness
0.30mm
Height Above Board
0.163" (4.15mm)
Mounting Type
Surface Mount
Cable End Type
Tapered
Termination
Solder
Locking Feature
Slide Lock
Features
Zero Insertion Force (ZIF)
Contact Finish
Gold
Contact Finish Thickness
5.9µin (0.15µm)
Operating Temperature
-30°C ~ 85°C
Current Rating
0.500A
Voltage Rating
50V
Housing Material
Polyamide (PA46), Nylon 4/6
Product Type
PCB
Number Of Positions / Contacts
26
Mounting Angle
Vertical
Mounting Style
SMD/SMT
Contact Material
Spring Copper Alloy / Nickel Substrate
Actuation Type
ZIF
Contact Location
Top Contact
Termination Style
Solder
Gender
Receptacle
Pitch Spacing
0.5mm
No. Of Contacts
26
No. Of Rows
1
Ffc/fpc Thickness
0.3mm
Contact Termination
Surface Mount Vertical
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
OR743TR
XF2J262411A
XF2J262411A
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
XF2J-2624-11A
Manufacturer:
OMRON
Quantity:
33 351
24
XF
4. When unlocking the slider (lever), place your fingers on
5. When inserting and removing the FPC, be sure to check
Using the FPC in the follow ways may damage the FPC,
either side or the entire slider (lever) and slowly lift the
slider (lever) up and away.
Do not engage the slider (lever) past its initial location
during the unlocking process. Doing so may result in
damage to the connector or contact failure.
Performing the following action may cause the terminals
to change shape or otherwise cause contact failures.
that the slider (lever) has been unlocked first.
change the shape of the contacts, or result in contact fail-
ure.
• Using tweezers to unlock the slider (lever).
• Removing the FPC when the slider (lever) is still locked.
Primary location
6. Make sure that the FPC has been inserted correctly and
Mounting
1. Do not perform reflow or manual soldering with the FPC
2. The reflow conditions are as stated in OMRON’s specifi-
Designing
1. Gently pull out the FPC taking care not to apply force
2. When installing the FPC at a location or on equipment
3. Use the FPCs that conform to the appropriate specifica-
4. Use the same metal for the FPC plating and the connec-
5. “Whiskers” may protrude from the FOC film of some lead-
6. When designing the board, be sure to allow locking and
7. Make sure that the metal mask thickness is within the
not backward.
aligned with the customer's design specification may
damage the contacts and equipment may malfunction.
inserted in the connector and the slider (lever) in the
locked position. Doing so may result in contact failure.
cations and guidelines. These conditions, however,
depend on the type of solder, the manufacturer, the
amount of solder, the size of the circuit board, and the
other mounting materials. Confirm the mounting condi-
tions before proceeding.
directly to the connector. Bending the FPC in the area
where it enters the connector or applying force to the FPC
itself may result in contact failure.
that will subject the FPC to repeated vibration or move-
ment, secure the FPC prior to use.
tions and size as stated by OMRON. When using a differ-
ent FPC, or an F/F, contact OMRON.
tor plating.
free FPCs. Be careful when using these units.
operating space for the slider (lever).
appropriate specifications and size as stated by OMRON.
The recommended metal mask open area is 90% of the
printed circuit board mating dimensions given in the
dimensions diagrams.
• Removing the FPC by pulling it up and down or from left
Inserting the FPC incorrectly with the connecting face not
to right or twisting it sideways.
Component
XF