SNAP-HD-BF6 OPTO 22, SNAP-HD-BF6 Datasheet - Page 12
![COMPUTER CABLE, SNAP TEX, 1.8M, GRAY](/photos/20/53/205329/4551657_sml.jpg)
SNAP-HD-BF6
Manufacturer Part Number
SNAP-HD-BF6
Description
COMPUTER CABLE, SNAP TEX, 1.8M, GRAY
Manufacturer
OPTO 22
Type
Hardwarer
Datasheet
1.SNAP-HD-BF6.pdf
(17 pages)
Specifications of SNAP-HD-BF6
Jacket Color
Gray
Connector Type B
40 Pin Header Connector
Connector Type A
40 Pin Header Connector
Cable Assembly Type
Ribbon
Peak Reflow Compatible (260 C)
No
Cable Length
1.8m
Leaded Process Compatible
No
Conductor Size Awg
22AWG, 24AWG
Rohs Compliant
No
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
PAGE
12
Pinouts and Wiring (continued)
Connector Wiring—SNAP 16-Point Digital Modules
The following diagram shows16-channel module connector
wiring for the SNAP-HD-ACF6 wiring harness. Applies to
SNAP-IDC-16, SNAP-IDC-HT-16, SNAP-IAC-16, SNAP-IAC-A-16,
and SNAP-IAC-K-16 high-density digital modules.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2006–2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
Port for OptoTerminal-G20
SNAP High-Density Digital I/O Modules
Top View of Module
NOTE: The small four-pin connector on the top of a 16-point
module connects to the optional OptoTerminal-G20 using a
special adapter cable, included with the OptoTerminal.
Building Your Own Wiring Harness for a
16-channel Module
To build your own wiring harness similar to the SNAP-HD-
ACF6, you will need the following parts:
Connector: Molex 39-01-2165
Pins: Molex 39-00-0214
Cable: Belden 8308 (22 AWG, 16 conductor, shielded) or
equivalent (UL AWM style 2464)