NFK2-SC FLUKE NETWORKS, NFK2-SC Datasheet - Page 64

• Manufacturer Part Number: NFK2-SC
• Description: LAN Tester
• Manufacturer: FLUKE NETWORKS

Specifications of NFK2-SC

• Lead Free Status / RoHS Status: na

OF-500 OptiFiber Certifying OTDR
Technical Reference Handbook
Step 5: Viewing the Results
The tester offers the following views of OTDR test results:
•
•
•
See Chapter 3 for details on OTDR results.
Step 6: Saving Results from the First Direction
6-1 Press
6-2
6-3
6-4
2-16
The SUMMARY screen, shown when the test is
finished, tells you if the cabling passed or failed based
on the selected test limits.
To see the OTDR trace, press
shows some features of a typical OTDR trace.
To see a table of the events on the cabling, press
View Events.
If the tester shows a text editing screen, press
ID to access the fiber ID list you configured.
If the UNUSED AUTO SEQUENCE IDs list is not
showing, press
The tester highlights the first unused ID in the
UNUSED AUTO SEQUENCE IDs list. Press s to save
the test with this ID (03A-A01).
s
.
C
Auto Seq IDs.
A
View Trace. Figure 2-2
A
B
Pick
Step 7: Testing in the Second Direction
7-1 On the Job tab in Setup, change THIS END to END 2.
7-2 Clean the connector at the other end of the cabling,
Step 8: Saving Results from the Second Direction
8-1 Press
8-2 Press
8-3 Select the ID 03A-A01; then press s. The tester
This concludes the tutorial on using the OTDR. For more
information on using the OTDR, see Chapter 3.
connect the launch fiber to the connector; then press
T
already used.
adds the results from the second direction to the test
record.
s
B
.
Current Folder IDs to see the IDs you have
.