FH12-24S-0.5SV(55) Hirose Electric Co Ltd, FH12-24S-0.5SV(55) Datasheet - Page 18
![CONN FPC/FFC 24POS .5MM VERT SMD](/photos/2/91/29133/fh12-24s-0_5sv_55__sml.jpg)
FH12-24S-0.5SV(55)
Manufacturer Part Number
FH12-24S-0.5SV(55)
Description
CONN FPC/FFC 24POS .5MM VERT SMD
Manufacturer
Hirose Electric Co Ltd
Series
FH12r
Datasheet
1.FH12-5S-1SH55.pdf
(20 pages)
Specifications of FH12-24S-0.5SV(55)
Housing Material
Polyamide (PA), Nylon
Voltage Rating
50V
Current Rating
0.500A
Pitch
0.020" (0.50mm)
Connector Type
Vertical Contacts, 1 Sided
Number Of Positions
24
Ffc, Fcb Thickness
0.30mm
Height Above Board
0.142" (3.60mm)
Mounting Type
Surface Mount
Cable End Type
Straight
Termination
Solder
Locking Feature
Flip Lock
Features
Zero Insertion Force (ZIF)
Contact Finish
Gold
Operating Temperature
-40°C ~ 85°C
Product Type
PCB Receptacles
Number Of Positions / Contacts
24
Mounting Angle
Vertical
Mounting Style
SMD/SMT
Contact Material
Phosphor Bronze
Contact Plating
Gold
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
HFL124TR
18
FH12 Series 0.5mm and 1mm Pitch Connectors For FPC/FFC
Bottom Contact Type (common for 0.5mm/1mm Pitch)
3) Rotate down the actuator until firmly closed.
2. FPC/FFC Removal
1) Lift up the actuator.
2) Carefully remove the FPC/FFC.
It is critical that the inserted FPC/FFC is not moved
and remains fully inserted. Should the FPC/FFC be
moved, open the actuator and repeat the process,
starting with Step 1.
Operation
Stiffener
6) Partial insertion of the FPC/FFC, offset insertion, and
7) When locking, handle the FPC/FFC so that a load
8) At the time of lock operation, application of force
diagonal insertion will result in an unfavorable engage-
ment of the lock lever in which the lock lever is raised.
To correct this, first remove the FPC/FFC and then
reinsert it. Forcing the lock will damage the connector.
is not applied to the FPC/FFC as would occur by
pulling the FPC/FFC, or lifting it, etc.
When a load is applied in the opposite direction to
the rotational movement of the lock, an excessive
load will be applied and this will cause connector
damage.
such as that indicated by the arrows in the dia-
grams below will cause the lock lever to disengage.
When the lock lever has become disengaged,
please exchange the entire connector.
Precautions