FH12-16S-0.5SV Hirose Electric Co Ltd, FH12-16S-0.5SV Datasheet - Page 19

• Manufacturer Part Number: FH12-16S-0.5SV
• Description: CONN FPC/FFC 16POS .5MM VERT SMD
• Manufacturer: Hirose Electric Co Ltd
• Series: FH12r

Specifications of FH12-16S-0.5SV

• Connector Type: Vertical Contacts, 1 Sided
• Number Of Positions: 16
• Pitch: 0.020" (0.50mm)
• Ffc, Fcb Thickness: 0.30mm
• Height Above Board: 0.142" (3.60mm)
• Mounting Type: Surface Mount
• Cable End Type: Straight
• Termination: Solder
• Locking Feature: Flip Lock
• Features: Zero Insertion Force (ZIF)
• Contact Finish: Gold
• Operating Temperature: -40°C ~ 85°C
• Current Rating: 0.500A
• Voltage Rating: 50V
• Housing Material: Polyamide (PA), Nylon
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: HFL16TR

Top Contact Type
1. FPC/FFC Termination procedure.
1) Lift up the actuator. Use thumb or index finger.
2) Fully insert the FPC/FFC parallel to mounting sur-
3) Rotate down the actuator until firmly closed.
2. FPC/FFC Removal
1) Lift up the actuator.
2) Carefully remove the FPC/FFC.
Connector installed on the board.
face, with the exposed conductive traces facing
UP.
It is critical that the inserted FPC/FFC is not moved
and remains fully inserted. Should the FPC/FFC be
moved, open the actuator and repeat the process,
starting with Step 1 above.
Operation
FPC/FFC conductive traces
Stiffener
1) Avoid further lifting of the lock lever once the lock has been
2) Avoid further pressing of the lock portion from the
3) Do not insert the FPC/FFC diagonally. Doing so will
4) When closing down the actuator apply equal pres-
released. Doing so will cause the lock lever to separate
from the rotational shaft, and the lock lever will become dis-
engaged or the hook portion of the connector body will be
damaged.
locked condition when the FPC/FFC has not yet
been inserted. Doing so will cause the lock lever to
become disengaged from the rotational shaft, and
the hook portion of the connector body will be
damaged.
result in the corners of the FPC/FFC catching on the
contacts and will cause deformation of the contacts.
sure to both sides of the actuator.
FH12 Series 0.5mm and 1mm Pitch Connectors For FPC/FFC
Precautions
19