FH12-45S-0.5SV Hirose Electric Co Ltd, FH12-45S-0.5SV Datasheet - Page 17

• Manufacturer Part Number: FH12-45S-0.5SV
• Description: CONN FPC/FFC 45POS .5MM VERT SMD
• Manufacturer: Hirose Electric Co Ltd
• Series: FH12r

Specifications of FH12-45S-0.5SV

• Connector Type: Vertical Contacts, 1 Sided
• Number Of Positions: 45
• Pitch: 0.020" (0.50mm)
• Ffc, Fcb Thickness: 0.30mm
• Height Above Board: 0.142" (3.60mm)
• Mounting Type: Surface Mount
• Cable End Type: Straight
• Termination: Solder
• Locking Feature: Flip Lock
• Features: Zero Insertion Force (ZIF)
• Contact Finish: Gold
• Operating Temperature: -40°C ~ 85°C
• Current Rating: 0.500A
• Voltage Rating: 50V
• Housing Material: Polyamide (PA), Nylon
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: HFL45TR

Connector Operating Instructions, precautions and recommendations
Bottom Contact Type (common for 0.5mm/1mm Pitch)
1. FPC/FFC Termination procedure.
1) Lift up the actuator. Use thumb or index finger.
2) Fully insert the FPC/FFC parallel to mounting sur-
Connector installed on the board.
face, with the exposed conductive traces facing
down.
Operation
FPC/FFC conductive traces
1) Avoid grasping the actuator with two fingers or lift-
2) Do not use a thin tool such as the tip of a screw-
3) Do not apply force in the direction of arrows A, B, or C
4) When inserting the FPC/FFC, do not forcefully rub against
5) Insert the FPC/FFC at the proper position of the connector
driver to release the lock lever. Doing so will cause
deformation of the contacts.
while the lock lever is open.
Doing so will cause the lock lever to become disen gaged,
or will damage the hook portion of the connector body.
insertion slot, and insert perpendicularly with respect to the con-
nector. Improper insertion will cause continuity problems, disen-
gagement of the lock lever, and damage to the hook portion.
ing the actuator with fingernail.
the surface beneath the connector insertion slot.
Doing so will result in the FPC/FFC forcefully striking the
contacts and this will cause contact deformation, peeling
of the FPC/FFC conductors, and other irregularities.
FH12 Series 0.5mm and 1mm Pitch Connectors For FPC/FFC
Precautions
17