FH19C-13S-0.5SH(51) Hirose Electric Co Ltd, FH19C-13S-0.5SH(51) Datasheet - Page 9
![no-image](/images/manufacturer_photos/0/3/300/hirose_electric_co_ltd_sml.jpg)
FH19C-13S-0.5SH(51)
Manufacturer Part Number
FH19C-13S-0.5SH(51)
Description
CONN FPC/FFC 13POS .5MM SMD TIN
Manufacturer
Hirose Electric Co Ltd
Series
FH19Cr
Datasheet
1.FH19SC-4S-0.5SH05.pdf
(9 pages)
Specifications of FH19C-13S-0.5SH(51)
Connector Type
Bottom Contacts
Number Of Positions
13
Pitch
0.020" (0.50mm)
Ffc, Fcb Thickness
0.20mm
Height Above Board
0.036" (0.90mm)
Mounting Type
Surface Mount, Right Angle
Cable End Type
Tapered
Termination
Solder
Locking Feature
Flip Lock
Features
Zero Insertion Force (ZIF)
Contact Finish
Tin-Lead
Operating Temperature
-55°C ~ 80°C
Current Rating
0.500A
Voltage Rating
50V
Housing Material
Liquid Crystal Polymer (LCP)
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Operation and Precations
1. FPC/FFC Termination procedure.
1) Lift up the actuator. Use thumb or index finger.
2) Assure that the FPC/FFC is fully inserted parallel
3) Rotate down the actuator until firmly closed.
2. FPC/FFC Removal
1) Lift up the actuator.
2) Carefully remove the FPC/FFC.
Connector installed on the board.
to mounting surface, with the exposed conductive
traces facing down.
It is critical that the inserted FPC/FFC is not moved
and remains fully inserted. Should the FPC/FFC be
moved, open the actuator and repeat the process,
starting with Step 1 above.
FH19C & FH19SC Series 0.5mm pitch, 0.9mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
FPC conductor surface
(Bottom side)
Operation
1) Do not apply excessive force or use any type of
2)
3) Application of excessive force to the inserted
tool to operate the actuator.
FPC/FFC may cause damage to connector and
may affect the reliability of electrical connection.
If specific application
requires continuous or
repeated pull or bend of
the inserted FPC/FFC,
assure that the forces are
NOT transmitted directly
to the connector.
Precautions
9