609961 MULTICORE (SOLDER), 609961 Datasheet - Page 2
![SOLDER WIRE, CRYSTAL 400, 0.71MM, 250G](/photos/20/82/208288/42260562_sml.jpg)
609961
Manufacturer Part Number
609961
Description
SOLDER WIRE, CRYSTAL 400, 0.71MM, 250G
Manufacturer
MULTICORE (SOLDER)
Datasheet
1.609961.pdf
(2 pages)
Specifications of 609961
External Diameter
0.71mm
Material Composition
60% Tin, 40% Lead Alloy
Melting Temperature
188°C
Weight
250g
Wire Size Swg
22SWG
Bit Temperature
340°C
Flux Type
400, Rosin Based, Halide
Outer Diameter
0.71mm
Solder Alloy
60/40 Sn/Pb
Solder Gauge Swg
22SWG
Rohs Compliant
No
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
the product may therefore be used to complement a No
Clean wave soldering or reflow process or to allow repairs
to cleaned boards without the need for a second cleaning
process. Should residue quantity be an important
consideration, Multicore X39 flux cored wire may be
specified if a halide free product is required or X52 if halide
may be tolerated. Crystal 500, 502, 505 and 511 offer
good activity and consequently cored wire flux contents
and hence residue levels may be reduced in comparison
with equivalent conventional products.
Multicore Prozone Solvent Cleaner (separate data sheet
available). Other proprietary solvent or semi-aqueous processes
may be suitable but saponification is not recommended.
A full description of test methods and detailed test results
are available on request.
Alloys: The alloys used for Crystal cored solder wires
conform to the purity requirements of the common national
and international standards. A wide range of wire diameters
is available manufactured to close dimensional tolerances.
Flux: Multicore Crystal solid fluxes are based on modified
rosins and carefully selected activators. In use they exhibit
a mild rosin odour and leave a small quantity of clear
residue.
Cored wire: Multicore Crystal cored solder wires are
designed to give fast and sustained wetting on both copper
and brass. This can be demonstrated using spreading tests
on both substrates under standard conditions for the
Multicore products and comparable competitor products.
After 5 seconds, area of spread is measured to form a
comparative index indicating total flux efficacy.
competitor products, which required a higher flux content
and leave more residues whilst achieving poorer spread.
This data is based on information believed to be reliable and is offered in good faith, but MULTICORE MAKES NO WARRANTIES EITHER EXPRESS OR IMPLIED AS TO ITS ACCURACY AND ASSUMES NO LIABILITIES ARISING
OUT OF ITS USE BY OTHERS as conditions and methods of use of the products are beyond MULTICORE’S control. The prospective user should determine the suitability of the product before using it on a commercial scale.
MULTICORE warrants only that the product will conform to its physical descriptions. MULTICORE MAKES NO OTHER WARRANTIES EXPRESS OR IMPLIED AND EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF FITNESS FOR
A PARTICULAR PURPOSE. IN NO EVENT SHALL MULTICORE BE RESPONSIBLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER THE CLAIM IS IN CONTRACT, NEGLIGENCE OR OTHERWISE.
www.multicore.com
TECHNICAL SPECIFICATION
Acid Value, mg KOH/g
Halide content, %
J - STD - 004
SIR Test (without cleaning)
Electromigration Test
(without cleaning)
Classification
Should cleaning be required, this is best achieved using
- solder spread (mm
- corrosion test
- IPC-SF-818 Class 3
- Bellcore TR-NWT-000078
- Bellcore TR-NWT-000078
- EN 29454-1
- J - STD - 004
- IPC-SF-818
Multicore Crystal flux cored solder wires out-perform
TEST
CRYSTAL FLUX PROPERTIES
2
)
205-220
LR3CN
RO L0
1.1.3
Pass
Pass
Pass
Pass
400
Zero
210
156-170
LR3CN
RO L1
1.1.2
500
0.04
Pass
Pass
Pass
Pass
290
156-172
MR3CN
RO M1
1.1.2
Pass
Pass
Pass
Pass
502
310
0.2
159-177
MR3CN
RO M1
1.1.2
Pass
Pass
Pass
Pass
505
315
0.5
164-176
MR3CN
RO M1
1.1.2
511
Pass
Pass
Pass
Pass
340
1.1
WARNING: The following information is for guidance only
and users must refer to the Material Safety Data Sheets
relevant to specific Multicore Crystal flux cored solder
wires before use.
Fume Hazards and Precautions: Avoid excessive
inhalation of the flux fumes. These are irritating to the
throat and respiratory organs. Prolonged or repeated
exposure may rarely result in sensitisation leading to
occupational asthma. Suitable fume extraction equipment
should be used to extract flux fumes away from operators.
Protection and Hygiene: Lead is harmful if absorbed into
the body through the digestive system or skin. Eating,
drinking and smoking should not be permitted in the
working area. Hands should be washed with soap and
warm water after handling solder, especially before eating.
Crystal 400
Multicore 304
Competitor A
Competitor B
Crystal 500
Multicore 381
Competitor C
Competitor D
Crystal 502
Competitor E
Competitor F
Competitor G
Competitor H
Crystal 505
Crystal 511
Competitor J
Competitor K
HEALTH AND SAFETY
- oxidised for 1 hour @ 205°C
- oxidised for 1 hour @ 150°C
- oxidised for 1 hour @ 205°C
- oxidised for 1 hour @ 205°C
PRODUCT
PRODUCT
PRODUCT
PRODUCT
Crystal and halide free competitor products
Multicore Crystal and competitor products
Multicore Crystal and competitor products
Relative wetting performance of Multicore
Relative wetting performance of Multicore
Crystal and RMA competitor products
Relative wetting performance of
Relative wetting performance of
CONTENT
CONTENT
CONTENT (%)
CONTENT (%)
FLUX
FLUX
(%)
2.7
2.0
2.4
3.5
2.7
2.7
(%)
2.7
2.2
2.0
FLUX
FLUX
2.2
3.0
3.5
3.5
2.8
2.9
2.4
3.1
CONTENT
CONTENT
HALIDE
HALIDE
(%)
0.2
0.4
0.4
0.4
0.5
0.5
(%)
1.1
1.2
1.6
Oxidised copper
Oxidised copper
222
220
191
202
300
195
150
240
AREA OF SPREAD, mm
AREA OF SPREAD, mm
AREA OF SPREAD, mm
Oxidised
AREA OF SPREAD, mm
Oxidised
copper
copper
220
200
190
150
230
220
270
260
210
MSL Ref: 596 9/99
Oxidised brass
Oxidised brass
209
209
140
140
170
110
120
Oxidised
Oxidised
85
brass
brass
160
150
180
120
150
240
390
190
230
2
2
2
2