S1048-TAPE-1X100-FT Tyco Electronics, S1048-TAPE-1X100-FT Datasheet

TAPE, SEALANT, THERMOPLASTIC, 1INX100FT

S1048-TAPE-1X100-FT

Manufacturer Part Number
S1048-TAPE-1X100-FT
Description
TAPE, SEALANT, THERMOPLASTIC, 1INX100FT
Manufacturer
Tyco Electronics
Datasheets
1.S1048-TAPE-1X100-FT.pdf (6 pages)
2.S1048-TAPE-1X100-FT.pdf (2 pages)

Specifications of S1048-TAPE-1X100-FT

Tape Backing Material
Thermoplastic
Roll Length
100ft
Adhesive Material
Thermoplastic
Tape Type
Sealing
Width
1"
Product
Tape
Size
1 in x 100 ft
Description/function
Hot Melt Polyolefin Adhesive
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Cat. No. 1773371
S1081, S1030, S1048, T-DR25
Adhesive Tapes
S1081 - Self-Amalgamating Harness Tape
Introduction
S1081 is a modified, self-amalgamating, non-flame retarded, polyolefin based harness tape. It has
a continuous operating temperature of -80
+120
Colour:
Dimensions:
Packaging:
Specification:
Typical Applications
S1081 is used as a protective wrap on damaged cables and irregular shapes where it is not
practical to install a heat shrinkable moulded part or tubing. When heated in excess of 120
tape shrinks lengthways and self-amalgamates, forming a tightly fitting, continuous cover.
Installation Guidelines
Tightly wrap the S1081 around the substrate using a 50% overlap. The free end of the tape may
be secured by “tacking” with a soldering iron or hot air gun. The entire taped area should then be
heated in excess of 120
minutes. This will cause the tape to amalgamate.
When used with cable jacketed in Raychem’s DR-25, NT or RNF-100 tubings, S1081 will also
bond to the substrate to give a total seal. For other substrates, we recommend that a brief adhesion
test is carried out prior to installation. When necessary, S1030 Adhesive Tape may be placed at
each end, under the layer of S1081, in order to seal more effectively.
o
C.
Black
Width: 20mm nominal
Thickness: 0.64mm nominal
10mtr roll interleaved with release paper
RK6019
o
C using a hot air gun, alternatively placed in an oven at 120
Specifications subject to change.
o
C to +130
o
C and a self-amalgamating temperature of
www.tycoelectronics.com
o
C for 15
o
C, the

S1048-TAPE-1X100-FT Summary of contents

Page 1

... S1081, S1030, S1048, T-DR25 Adhesive Tapes S1081 - Self-Amalgamating Harness Tape Introduction S1081 is a modified, self-amalgamating, non-flame retarded, polyolefin based harness tape. It has a continuous operating temperature of -80 o +120 C. Colour: Dimensions: Packaging: Specification: Typical Applications S1081 is used as a protective wrap on damaged cables and irregular shapes where it is not practical to install a heat shrinkable moulded part or tubing ...

Page 2

... Typical Applications S1048 will adhere extremely well to most cable jacket materials, ie: ZHTM, DR-25, FDR or RNF as long as enough heat has been applied at the installation stage to ensure complete flow and wettability of the adhesive. This product will generally give a higher bond strength to most substrates when compared to S1030 ...