RJ11FC6N Amphenol PCD, RJ11FC6N Datasheet - Page 38

• Manufacturer Part Number: RJ11FC6N
• Description: CAP FOR PLUG NICKEL
• Manufacturer: Amphenol PCD
• Series: RJ11Fr

Specifications of RJ11FC6N

• Accessory Type: Cap (Cover)
• Features: Lanyard
• For Use With/related Products: RJ11F Series Plug
• For Use With: APC1121 - CONN PLUG RJ11 IP67 NICKELAPC1120 - CONN PLUG RJ11 IP67 BLACKRJ11F6G - CONN PLUG RJ11 IP67 GREEN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Color: -
• Other names: APC1129

Can be used with most IEEE 1394 cordset brands: No tools required!
Plug Assembly
1. If a fully sealed (IP67) assembly is required: Install the white tape
2. Insert the black O Ring around the front face of the IEEE 1394 plug.
3. Insert the IEEE 1394 cordset into the metallic backshell.
4. Insert the retention spacer laterally onto the cable (this spacer is soft
5. Insert the friction ring laterally onto the cable cordset.
6. Insert the IEEE 1394 plug into the metallic circular shell. Note at this
7. Screw the backshell on the plug body. A spanner may be required to
Important Note: The sealing of the connector is not done by the
black retention spacers which are slotted, but rather by the front face
O-Ring (Fig 2).
Receptacle Assembly
To Solder your cable onto the PCB:
1. Attach the 2 metallized plastic inserts around the PCB (Fig 1a & 1b).
2. Insert the IEEE 1394 module from the rear of the connector.
Removing Modules
1. Insert the removal tool FWF ODE
2. Push the module back with thumb.
n
n
n
Connector Type
6:
2:
7:
Shell plating
N:
G:
Accessories
Assembly Instructions
around the plug to cover the 4 holes of the overmolding. If there are
no holes omit this step.
This O Ring will ensure the seal.
so as to adapt to various overmolding styles) and slide the IEEE 1394
plug into this retention spacer.
step that the main key is used for polarization.
fully close the backshell to the circular shell.
from the front
Metallic Caps
Panel Gasket for square flange receptacle
(Thickness: 0,8 mm [.031]): JE15
Receptacle Insert removal tool: FWF ODE
Plug
Square Flange Receptacle
Jam Nut Receptacle
Nickel - ROHS Compliant
Olive Drab Cadmium
FWF TVC
2
G
36
3
5
7a
1a
1b
1
4
6
2
7b
1
2
2