9422ATCF331 SQUARE D, 9422ATCF331 Datasheet - Page 40

• Manufacturer Part Number: 9422ATCF331
• Description: Disconnect Switch
• Manufacturer: SQUARE D

Specifications of 9422ATCF331

• Contact Voltage Ac Max: 600V
• Contact Current Ac Max: 30A
• Peak Reflow Compatible (260 C): No
• Supply Voltage: 600VAC
• Leaded Process Compatible: No
• Mounting Type: Flange
• Supply Current: 30A
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

40
Figure 1
Figure 2
Figure 3
Figure 4
© 1997 Square D All Rights Reserved
Class 9423 Door Closing Mechanisms:
Single- and Multi-Door Enclosures
Enclosure Construction Details for Types M1 and M8 Kits
Single- and multi-door enclosures designed to accept the Class 9423 Type
M1 and/or Type M8 kits must be constructed according to the dimensions
shown on this page. Imperative in the enclosure design is the door depth,
which must be 1.13" (29mm) as shown in Figure 1 regardless of whether a
disconnect device is used.
The figures are top views of the flange or center channels with various door
configurations. Transpose all dimensions for enclosures with doors closing
oppositely of those shown.
Flange Construction
Figure 1 shows flange construction. Dimension C is 3" (77mm) with a Type
A5 or A7 handle on the enclosure flange. With a Class 9422 Type A1 handle
mechanism on the enclosure flange, the minimum dimension for C is 3"
(77mm); without a Class 9422 Type A1 handle mechanism on the enclosure
flange, the minimum dimension for C is 1.5" (39mm).
Channel Construction
Figures 2 and 3 show the type of channel construction where two doors close
on a common channel.
In Figure 2, the dimensions apply when a Type M8 kit is used on each regard-
less of whether a Class 9423 Type M2 auxiliary door interlock is utilized.
In Figure 3, the dimensions apply when a Class 9422 Type A1 handle, Class
9423 M1 kit, and a Class 9423 M2 interlock are all located on the channel.
(For an alternate door closing method using a similar type of construction, re-
fer to Class 9423 Type M25 on page 41.)
Figure 4 shows the type of channel construction where one door closes on a
common channel, while another door is hinged on the common channel. For
this type of channel construction, the minimum dimension for E is 3" (77mm)
with a Class 9422 A1 handle mechanism in the channel (with or without a
Class 9423 M1 kit) or 2" (51mm) without an A1 handle.
Additionally, the minimum for dimension D with this type of channel construc-
tion is 4" (102mm) with a Class 9422 A1 handle mechanism in the channel
(with or without a Class 9423 M5 kit) or 3" (77mm) without an A1 handle.
12/97