CPM2C-MAD11 Omron, CPM2C-MAD11 Datasheet - Page 15

• Manufacturer Part Number: CPM2C-MAD11
• Description: Analog I/O Module
• Manufacturer: Omron

Specifications of CPM2C-MAD11

• Output Type: ...
• External Width: 33mm
• Supply Voltage Max: 24VDC
• External Depth: 65mm
• Mounting Type: DIN Rail
• External Height: 90mm
• Approval Bodies: UL, CSA, CE
• For Use With: CPM2C PLCs
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

J DEDICATED I/O MODULES SPECIFICATIONS
Mixed Analog I/O Module CPM2C-MAD11 (2 input and 1 output channels)
For process input variables such as pressure, flow, and humidity,
use a Mixed Analog I/O Module. The single analog output can
provide a signal for recording devices, valve controllers or a
transfer output of the analog signal. Up to 4 Mixed Analog I/O
Modules can be used in a CPM2C system with other Expansion
I/O Modules. A maximum of 5 Expansion I/O Modules, including
Dedicated I/O Modules, can be used in a CPM2C system.
Item
Analog
i
input
section
Analog
output
section
Conversion time
Isolation method
A--106
t
t
t
g
g
Number of inputs
Input signal range
Max. rated input
External input impedance
Resolution
Overall accuracy
A/D conversion data
Averaging function
Open-circuit detection function
Number of outputs
Output signal range
Allowable external output load resistance
External output impedance
Resolution
Overall accuracy
Set data (D/A conversion)
Micro Programmable Controller
y
y
25°C
0 to 55°C
25°C
0 to 55°C
CPM2C
Voltage I/O
2 inputs (2 words allocated)
0 to 10 VDC, or --10 to +10 VDC
±15 V
1 MΩ min.
1/6000 (full scale)
0.3% full scale
0.6% full scale
16-bit binary (4-digit hexadecimal)
Full scale for --10 to +10 V:
Full scale for other ranges:
Supported (Settable for individual inputs via DIP switch)
Supported
1 output (1 word allocated)
1 to 5 VDC, 0 to 10 VDC, or
1 kΩ min.
0.5 Ω max.
1/6000 (full scale)
0.4% full scale
0.8% full scale
16-bit binary (4-digit hexadecimal)
Full scale for --10 to +10 V:
Full scale for other ranges:
2 ms/point (6 ms/all points)
Photocoupler isolation between analog I/O terminals and internal circuits. No
isolation between analog I/O signals.
--10 to +10 VDC
0 to 5 VDC, 1 to 5 VDC,
3. Expansion I/O
1. Analog I/O terminals
connector (input)
2. Input type and
range selector
DIP switch
F448 to 0BB8 Hex
0000 to 1770 Hex
F448 to 0BB8 Hex
0000 to 1770 Hex
Current I/O
0 to 20 mA or 4 to 20 mA
±30 mA
250 Ω
0.4% full scale
0.8% full scale
0 to 20 mA or 4 to 20 mA
600 Ω max.
—