72-PMO-3 Grayhill Inc, 72-PMO-3 Datasheet

Programmable Logic Controller

72-PMO-3

Manufacturer Part Number
72-PMO-3
Description
Programmable Logic Controller
Manufacturer
Grayhill Inc
Datasheet

Specifications of 72-PMO-3

Peak Reflow Compatible (260 C)
No
Supply Voltage
5.5V
Leaded Process Compatible
No
For Use With
Network Interface, 4.5 To 5.5 VDC Input Voltage Range, Voltage Input, Pcb
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
L-99
APPLICATIONS
DIGITAL INPUTS/OUTPUTS
The ProMux
any of our 8, 16, or 24 digital module racks.
Plug Grayhill OpenLine
or G5 digital I/O modules into the racks. They
can be mixed in any combination. Connect the
ProMux
and then issue commands to monitor the
inputs or control the outputs. Commands are
included which permit you to:
• Read the ON/OFF status of inputs
• Determine the width of input pulses
NETWORK INTERFACES
ProMux
FEATURES
• Each Board Controls Up to 24
• Up to 256 Addressable ProMux
• 100% Optomux Compatible,
• Communications at Speeds From
• Transient Protection on
• Direct Plug-In or Ribbon
• BASIC and C Drivers for the PC
Standard, Mini, G5 or OpenLine
Digital Modules
Boards Separated by 4,000 Feet
Plus Extra Commands
300 Baud to 38.4 KBaud.
Communications Lines
Cable Interconnection
®
boards serially to a host computer
Grayhill, Inc. • 561 Hillgrove Avenue • LaGrange, Illinois 60525-5997 • USA • Phone: 708-354-1040 • Fax: 708-354-2820 • www.grayhill.com
Stand Alone Control
®
Local Control & I/O
®
(Optomux)
Distributed I/O
network interface mates with
Remote I/O
SCADA
RTU
®
, standard, miniature,
System 50
®
®
• Count pulses at frequencies up to 400Hz
• Detect rising or falling edges
• Latch momentary input events
• Turn outputs ON or OFF individually or in
• Pulse-width modulate outputs
• Provide delayed-on or delayed-off outputs
• Generate pulses or squarewaves
COMMUNICATIONS
The host computer and ProMux
communicate serially over two pair of twisted
wires per RS-422/485 in either a multi-drop or
repeat configuration. They use an industry
standard ASCII string format to code the
command
Application programs running on the host
computer issue commands and then await
responses from the ProMux
communications speed is selectable between
300 baud and 38.4 KBaud. Each controller on
the network is assigned a unique base address
from 0 to 255. You can separate boards from
one another by as much as 4,000 feet.
groups
and
response
®
boards. The
messages.
®
boards
SOFTWARE
Software drivers are available which simplify
the task of interfacing programs written in
Visual Basic or C to the ProMux
Sample programs and the set-up and debug
utilities are included on the disk with the drivers.
Interface drivers for most third party software
packages are available through their
distributors.
OTHER FEATURES
All ProMux
shipped in static proof boxes.
Because space inside your enclosure can be
limited, we offer numerous rack plug-in
configuration options. For applications requiring
even more mounting flexibility, the ProMux
boards can be connected to racks with a
ribbon cable up to six feet long.
If you do not have an RS-422 or RS-485 serial
port on your PC, we offer a variety of RS-232
to RS-422/485 converters (see page L-103)
“Communications Converters” for technical
and ordering information.
®
boards are thoroughly tested and
®
network.
®

Related parts for 72-PMO-3

72-PMO-3 Summary of contents

Page 1

System 50 NETWORK INTERFACES ® ProMux (Optomux) FEATURES • Each Board Controls Standard, Mini OpenLine ® Digital Modules • 256 Addressable ProMux ® Boards Separated by 4,000 Feet • 100% Optomux Compatible, Plus ...

Page 2

... Distributor. System 50 2.25 (57,1) 1.5 (38,1) NOTE: FRONT LEGS ARE INSTALLED ONLY ON 72-PMO-3 PLUG CONNECTOR ON 72-PMO-1 MATES DIRECTLY WITH A RACK HEADER CONNECTOR ON 72-PMO-3 MATES WITH A RIBBON CABLE For prices and discounts, contact your local sales office, an authorized Distributor, or Grayhill. L-100 ...

Related keywords