F3SNA0307P25 Omron, F3SNA0307P25 Datasheet - Page 34

• Manufacturer Part Number: F3SNA0307P25
• Description: Safety Light Curtain
• Manufacturer: Omron

Specifications of F3SNA0307P25

• Beam Spacing: 15mm
• Control Output Type: PNP
• No. Of Beams: 19
• Protection Height: 307mm
• Sensing Range Max: 10m
• Supply Voltage Max: 24VDC
• Peak Reflow Compatible (260 C): No
• Light Curtain Type: Safety
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Non-safety Output
Auxiliary Output
The default of this output is the reverse signal of the safety outputs
(Dark-ON output). This output can be used for monitoring purposes
by connecting it to a device such as a PLC.
The auxiliary output can be selected to give one of the following
output operation modes by the F39-MC11. (No selection can be made
by the F3SN-B.)
Beam Center-line
The beam center-line is the line going through all of the beams. (See
diagram below.) This position is a reference line for measuring safety
distance. Use the line closer to the hazardous area as a reference line
for the safety distance.
Dark-ON output mode (fixed for the F3SN-B)
Light-ON output mode
Light diagnosis mode
Lockout mode
Outermost-beam monitoring mode
Specified-beam mode
Blanking monitoring mode (F3SN-A only)
Beam
center-line
mark
http://www.ia.omron.com/
Safety distance
1 mm
External Indicator Output
(Series-connection type only)
This output can be connected to an external indicator to display one
of the operation modes as selected by the F39-MC11. The default of
this output is Light-ON output. A desired output operation mode can
be selected by using the F39-MC11.
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
F3SN-A/F3SN-B/F3SH-A
34