HS6E-M44B03-G IDEC, HS6E-M44B03-G Datasheet - Page 19

• Manufacturer Part Number: HS6E-M44B03-G
• Description: SWITCH, SAFETY INTERLOCK, 2NC, 2A
• Manufacturer: IDEC
• Series: HS6Er

Specifications of HS6E-M44B03-G

• Contact Voltage Ac Max: 125V
• Contact Voltage Dc Max: 30V
• Contact Current Ac Max: 2A
• Contact Current Dc Max: 2A
• Switch Terminals: Cable
• Contact Configuration: SPST-NC / SPST-NC
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

(07/03/12)
• In order to avoid electric shock or fire, turn the power off before
• If relays are used in the circuit between the interlock switch
• Regardless of door types, do not use the interlock switch as a
• Do not apply excessive shock to the interlock switch when
• If the operating atmosphere is contaminated, use a protective
• Entry of a considerable amount of foreign objects into the
Mounting
Mount the interlock switch on the
machine. Mount the actuator on the
hinged door.
Note: When mounting an actuator, make sure
Recommended Screw Tightening Torque
• Interlock switch (M4 screw): 1.0 to 1.5 N·m
• Actuator (M4 screw): 1.0 to 1.5 N·m
• Mounting bolts are not supplied, and must be purchased
Note: The above recommended tightening torque of the mounting
Cable
• Do not fasten or loosen the gland at the bottom of the interlock
• When bending cable during wiring, make sure that the cable
• When wiring, make sure that water or
installation, removal, wiring, maintenance, or inspection of the
switch.
and the load, use only safety relays, since welded or sticking
contacts of standard relays may invalidate the functions of the
interlock switch. Perform a risk assessment and make a safety
circuit which satisfies the requirements of the safety category.
door stop. Install a mechanical door stop at the end of the door
to protect the interlock switch against excessive force.
opening or closing the door. A shock to the interlock switch
exceeding 1,000 m/s
switch.
cover to prevent the entry of foreign objects into the interlock
switch through the actuator entry slots.
separately by the user.
switch.
radius is kept at 40 mm minimum.
oil does not enter from the end of
cable.
Safety Precautions
Instructions
that the actuator enters into the slot in
the correct direction, as shown on the
right.
screw is the value with hex socket head bolts. When other
screws are used and tightened to a smaller torque, make
sure that the screws do not become loose after mounting.
2
may cause damage to the interlock
Gland
HS6B Subminiature Interlock Switches
• Do not place a PLC in the circuit between the interlock switch
• Do not disassemble or modify the interlock switch, otherwise a
• Do not install the actuator in the location where a human body
• Do not store the interlock switches in a dusty, humid, or
• Use proprietary actuators only. When other actuators are
• Cover the unused actuator entry slot using the slot plug
Wire Identification
• Wires can be identified by color and/or a white line printed on
Terminal Number Identification
• When wiring, the terminal number on each contact can be
• The following diagrams show a safety (main) contact and one
• When wiring, cut any dummy insulation (black) and any
Blue 11
Orange 33
Blue 11
Brown 21
Orange 33
No.
and the load. Safety security can be endangered in the event
of a malfunction of the PLC.
malfunction or an accident may occur.
may come in contact. Otherwise injury may occur.
interlock switch may affect the mechanism of the interlock
switch and cause a malfunction.
organic-gas atmosphere.
used, the interlock switch may be damaged.
supplied with the interlock switch.
the wire.
identified by wire color.
or two auxiliary contacts for two-contact and three-contact
types.
unused wires at the end of the jacket to avoid incorrect wiring.
1
2
3
Orange/White
Brown/White
Blue/White
Insulation
Color
1NC-1NO
2NC-1NO
Zb
Zb
No.
12 Blue/White
34 Orange/White
12 Blue/White
22 Brown/White
34 Orange/White
4
5
6
Insulation
Orange
Brown
Color
Blue
Blue 11
Orange 31
Blue 11
Brown 21
Orange 31
2NC
3NC
Zb
Zb
Dummy Insulation
(black)
Colored Insulation
12 Blue/White
32 Orange/White
12 Blue/White
22 Brown/White
32 Orange/White
Jacket
19