BMK80000 Red Lion Controls, BMK80000 Datasheet
![Base Mount Kit](/photos/21/37/213739/4607396_sml.jpg)
BMK80000
Manufacturer Part Number
BMK80000
Description
Base Mount Kit
Manufacturer
Red Lion Controls
Datasheet
1.BMK80000.pdf
(1 pages)
Specifications of BMK80000
For Use With
Red Lion CUB7 Series Panel Meters
Lead Free Status / RoHS Status
na
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net
MODEL BMK8 - BASE MOUNT KIT FOR CUB7
DIMENSIONS In inches (mm)
INSTALLATION
1. Mark and drill holes (5/32") in existing panel using the
2. Remove the panel latch (mounting clip) from the
3. Slide the CUB7 through the cut out in the BMK8 until the
4. Slide the panel latch (mounting clip) over the rear of the unit and
5. Alternately tighten mounting screws.
6. Route wires through existing panel wire hole or through wire hole on base mount
7. Mount the CUB7/base mount assembly to the existing panel or frame utilizing
BMK8 as a template. An addition hole may be cut in
the existing panel for wire feed.
CUB7 unit and insert the mounting screws (supplied
with the CUB7) on both sides of panel latch. The tip
of the screw should not project from the hole in the
panel latch (mounting clip).
bezel flange contacts the base mount. The CUB7 panel gasket
is optional.
towards the front of the unit until it latches firmly against the inside of the
base mount. Note: It is necessary to hold the CUB7 in place when sliding the
mounting clip into position.
and connect to the appropriate terminals on the CUB7.
the four bolts and nuts provided with the base mount.
DESCRIPTION
Wire feed to the CUB7 unit may be through the existing panel/frame or through
the hole in the BMK8 itself.
includes four mounting bolts and nuts.
ORDERING INFORMATION
For More information on Pricing, Enclosures & Panel Mount Kits refer to
the RLC Catalog or contact your local RLC Distributor.
The BMK8 base mount is designed for use with the CUB7 series products.
The base mount is constructed of steel with a textured black finish and
MODEL NO.
BMK8
DESCRIPTION
CUB7 BASE MOUNT KIT
PART NUMBER
Bulletin No. BMK8-X
Drawing No. LP0579
Effective 4/05
BMK80000