SNAP-RACKDIN OPTO 22, SNAP-RACKDIN Datasheet - Page 7

• Manufacturer Part Number: SNAP-RACKDIN
• Description: SNAP Rack DIN-rail Adapter Clip
• Manufacturer: OPTO 22
• Type: Mounting Racksr

Specifications of SNAP-RACKDIN

• Peak Reflow Compatible (260 C): No
• Mounting Type: Snap Rack Mount
• Number Of Pins: 50-Pin
• Number Of Positions: 2
• Standards: UL Listed, CSA Certified
• Terminal Type: Screw
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

DATA SHEET
Form 784-041216
Mounting
assembly should be mounted horizontally.
grams on the next two pages.
1. Use SNAP rack mounting extrusion as template.
2. Be sure to use the diagrams on the next two pages to
NOTE: If you are not using hold-down screws, the SNAP rack
Use the following steps to mount racks as shown in the dia-
Preferred Method: Template
(Product on site)
determine required product and option clearances.
Center-to-Center Length (All Models)
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590 • Phone: [phone] • 800-321-OPTO • Fax: [phone] • www.opto22.com
SNAP-B12MC-P
SNAP-B16MC-P
SNAP-B8MC-P
SNAP-B12MC
SNAP-B16MC
SNAP-D64RS
Part Number
Inside Sales: 800-321-OPTO • Product Support: 800-TEK-OPTO • 951-695-3080 • Fax: [phone] • E-mail: [e-mail]
SNAP-B8MC
SNAP-B12M
SNAP-B16M
SNAP-B4M
SNAP-B8M
SNAP-M16
SNAP-M32
SNAP-M64
12-module rack
16-module rack
4-module rack
4-module rack
8-module rack
Description
Center-to-Center
Length
3.51 in.
4.01 in.
3.51 in.
5.01 in.
4.34 in.
upper right with respect to a center line (CL).
1. Using the diagrams on the next two pages, determine CL1
2. Use the center-to-center length specification table below to
3. Repeat the process for each center line position.
(No product on site)
Alternate Method: Prefabrication of
Mounting holes are in sets of two, located on lower left and
mounting hole positions. (CL1 is located on the left side of all
SNAP rack mounting extrusions.)
determine the offset between center lines and the number of
center line positions for each model.
Number of Center
Panels
Positions
SNAP RACKS
2
3
4
2
3
B SERIES
page 9/17