SNAP-PAC-R2-W OPTO 22, SNAP-PAC-R2-W Datasheet
![no-image](/images/manufacturer_photos/0/4/498/opto_22_sml.jpg)
SNAP-PAC-R2-W
Specifications of SNAP-PAC-R2-W
Related parts for SNAP-PAC-R2-W
SNAP-PAC-R2-W Summary of contents
Page 1
... Part of the Opto 22 SNAP PAC System R-series PAC is a rack-mounted, industrially hardened unit that can handle multiple tasks involving digital and analog control, serial string handling, communication, and enterprise connectivity ...
Page 2
... SNAP PAC R-series controllers must be connected to the appropriate rack to avoid damage to the controller. Both the SNAP-PAC-R1 and R2 are designed to work with SNAP PAC mounting racks, which are available with positions for Opto 22 SNAP I/O modules. Part numbers are SNAP-PAC-RCK4, SNAP-PAC-RCK8, SNAP-PAC-RCK12, and SNAP-PAC-RCK16. Factory Mutual-approved versions of these racks, with part numbers ending in -FM, are also available ...
Page 3
... The serial connector can be used for a modem connection using PPP. This connector can also be used for a direct connection to a serial device; communication is handled through PAC Control. 4 SNAP-PAC-R1s with serial numbers lower than 600,000 are limited to eight 4-channel digital modules per rack; remaining eight can be analog, serial, and high-density digital modules. ...
Page 4
... For the network shown in this diagram, either PAC Project Professional or PAC Project Basic can be used. SNAP PAC R-series Controller in Basic Network Configuration SNAP PAC R-series In this diagram, the SNAP PAC R-series controller uses one network interface to communicate with host computers and control I/O. The controller controls I/O on its own rack and on other Ethernet-based I/O units. ...
Page 5
... SNAP PAC R-series Controller Segmenting Ethernet Networks SNAP PAC R-series Field devices location #1 SNAP PAC R-series controller communicates with host computers through one network interface and controls I/O both directly on the rack and through the other Ethernet interface. PC running PAC Display Professional ...
Page 6
... SNAP PAC R-series (as I/O only) This diagram shows two SNAP PAC R-Series controllers functioning as I/O unit brains connected to two separate Ethernet networks. This configuration addresses the concern that an Ethernet network may fail or need maintenance, leaving the PC running OptoOPCServer and OptoDataLink, the PC running PAC Display, the controller, and the I/O units unable to communicate. Opto 22 • ...
Page 7
... SNAP PAC R-Series Controllers SNAP PAC R-Series Comparison Chart The following table compares SNAP PAC R-series controllers. FEATURE Factory Mutual approval Digital I/O Input latching point features On/off status Watchdog timer High-speed counting ( kHz) 2 Quadrature counting On-pulse and off-pulse measurement Frequency and Period measurement ...
Page 8
... Module types and maximum numbers allowed per I/O unit (with largest rack) 1 4-channel digital modules only; not available on high-density digital modules 2 Requires a SNAP quadrature input module (SNAP-IDC5Q) 3 Available when used with PAC Project Professional (version 8.2 or higher) 4 Requires a SNAP analog TPO module (SNAP-AOD-29) Opto 22 • ...
Page 9
... SNAP PAC R-Series Controllers Connectors and Indicators The following information applies to all SNAP PAC R-series controllers. (The microSD card slot is included in R-series PACs manufactured in November 2008 and later. PACs manufactured before November 2008 do not have this feature.) Independent 10/100 Mbps Ethernet interfaces ...
Page 10
... Dimensions The dimensions are the same for all SNAP PAC R-series controllers. Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com PAGE SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com 10 © ...
Page 11
... TPO, and pulse generation and measurement. SNAP I/O I/O provides the local connection to sensors and equipment. Opto 22 SNAP I/O offers points of reliable I/O per module, depending on the type of module and your needs. Analog, digital, serial, and special-purpose modules are all mixed on the same mounting rack and controlled by the same processor (SNAP PAC brain or rack-mounted controller) ...