SNAP-SCM-MCH16 OPTO 22, SNAP-SCM-MCH16 Datasheet - Page 2

• Manufacturer Part Number: SNAP-SCM-MCH16
• Description: I/O Rack
• Manufacturer: OPTO 22

Specifications of SNAP-SCM-MCH16

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

PAGE
2
Module Specifications
Breakout Board Specifications
Breakout Board LEDs
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX [phone] • [e-mail] • SUPPORT 800-835-6786 • 951-695-3080 • FAX [phone] • [e-mail]
© 2011 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
Baud rates
Parity
Data bits
Logic supply voltage
Logic supply current
Number of ports per module
Maximum number of modules per rack
Maximum cable length, multi-drop
I/O processor (brain or on-the-rack
controller) compatibility
Operating temperature
Storage temperature
Torque, hold-down screws
Torque, connector screws
Agency Approvals
Warranty
1. Each breakout board is powered by a separate power supply.
2. Breakout board uses power from the module.
Power Requirements
Operating Temperature
Relative Humidity
Agency Approvals
Warranty
+3.3V
Power and Serial LEDs
TX
Serial
Power
+5V
8.0 to 32.0 VDC @ 250mA
5.00 to 5.20 VDC @ 500mA
0 to 70 °C
95%, non-condensing
CE, RoHS, DFARS
30 months
RX
Power and
Serial LEDs
115,200
Even
8 only
5.0 to 5.2 VDC
250 mA
500 mA
1
8
1,000 feet at 115,200 Baud
SNAP-PAC-R1, SNAP-PAC-R2, SNAP-
PAC-EB1, or SNAP-PAC-EB2
0 to 70 °C
-30 to 85 °C
4 in-lb (0.45 N-m)
5.26 in-lb (0.6 N-m)
CE, RoHS, DFARS
30 months
1
SNAP PAC Motion Control Subsystem
1
2
Axis LEDs
Module LEDs
1
2
3
4
LED
Axis LEDs
Program LED
TX
Power Supply Fault
RX
Indicates
Pulse
Encoder
+Limit
–Limit