CS1W-CN713 Omron, CS1W-CN713 Datasheet - Page 28

• Manufacturer Part Number: CS1W-CN713
• Description: "CABLE CS1 EXP I/O,70cm"
• Manufacturer: Omron

Specifications of CS1W-CN713

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Easier Programming with
a Complete Instruction
Set and Interrupt
Functions
Memory Cassettes for
Program/Data
Management; Clock
Included
Compatibility with CQM1
Units
6
Features
You can also program and monitor from a personal computer at a remote
location via a modem. When used in combination with the protocol macro
function, it is also possible to call the personal computer from the CQM1H
using the PMCR(––) instruction, and when the connection is made, switch the
serial communications mode to Host Link (for remote programming/monitor-
ing) using the STUP(––) instruction.
If an Analog Setting Board is mounted, fine adjustments of settings, such as
rotational speed or timer settings, are possible on-site using the adjustments
on the front of the Board.
The ON/OFF status of a user-programmable DIP switch pin is stored in the
AR area. The setting of this pin can be used on-site to switch between trial
operation and actual operation, to switch set values, or to perform any other
function that can be programmed in response to the changes in status of the
AR bit corresponding to this DIP switch pin.
Math instructions (such as floating-point math, exponential functions, logarith-
mic functions, and trigonometric functions), a TOTALIZING TIMER
(TTIM(––)) instruction, a CHANGE RS-232C SETUP (STUP(––)) instruction,
and network communications instructions have been added. In addition, com-
plete interrupt functions for the CPU Unit are supported, including input inter-
rupts, high-speed counter interrupts, and interval timer interrupts (with
scheduled interrupts and one-shot interrupts). Interrupts from serial communi-
cations using a protocol macro (interrupt notification) are also supported.
These interrupts enable easier and more flexible machine control.
A Memory Cassette (EEPROM or flash memory) can be mounted in the front
of the CPU Unit. User programs, data memory (read-only DM, PC Setup) and
expansion instruction information can be saved and read in batch. It is also
possible to make settings so that data contained in the Memory Cassette is
loaded automatically at startup. This feature means that, in the event of bat-
tery expiration or careless programming/monitoring operations, data for user
programs and data memory is not lost. It also means that changes in user
programs required for different controlled machines can be made easily. Fur-
ther, by using a Memory Cassette with a clock, times and dates can be used
in the user program.
The Power Supply Units, Basic I/O Units, and Dedicated I/O Units for the
CQM1 can be used in the CQM1H. Consequently, Dedicated I/O Units like
Temperature Control Units, Sensor Units, B7A Interface Units, and Compo-
Bus/D (DeviceNet) Link Units can all be used. In addition, user programs used
on the CQM1, Programming Consoles for the CQM1 and conventional Mem-
ory Cassettes can also be used. (A conversion adapter is necessary to use
the Programming Console.)
CPU Unit
Memory Cassette
EEPROM/flash memory
User program, PC Setup, etc.
Section 1-1