UMP-15/2.5-D24-C Murata Power Solutions Inc, UMP-15/2.5-D24-C Datasheet - Page 9

• Manufacturer Part Number: UMP-15/2.5-D24-C
• Description: DC/DC TH 40W Q48-15V XMP
• Manufacturer: Murata Power Solutions Inc
• Series: UMPr

Specifications of UMP-15/2.5-D24-C

• Product: Isolated
• Output Power: 38 W
• Input Voltage Range: 18 V to 36 V
• Number Of Outputs: 1
• Output Voltage (channel 1): 15 V
• Output Current (channel 1): 2.5 A
• Isolation Voltage: 1.5 KV
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfi eld, MA 02048-1151 U.S.A.
Tel: [phone] [phone] Fax: [phone]
www.murata-ps.com email: [e-mail] ISO 9001 and 14001 REGISTERED
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifi cations are subject to change without
notice.
Qualifi cation
sive characterization process and long-term reliability is confi rmed via a rigorous
qualifi cation procedure. The qual procedure includes such strenuous tests as
thermal shock and 500 hour life. Qual testing is summarized below.
Qualifi cation Test
HALT
High Temperature Storage
Thermal Shock
Temperature/Humidity
Lead Integrity
Life Test
Marking Permanency
End Point Electrical Tests
* Interim electrical test at 200 hours.
For each new product, electrical performance is verifi ed via a comprehen-
Qualifi cation Testing
Method/Comments
DATEL in-house procedure
Max. rated temp., 1,000 hours
10 cycles, –55 to +125°C
+85°C, 85% humidity, 48 hours
DATEL in-house procedure
+70°C, 500 hours*
DATEL in-house procedure
Per product specifi cation
www.murata-ps.com
© 2009 Murata Power Solutions, Inc.
05/18/09
In-Line Process Controls and Screening
A combination of statistical sampling and 100% inspection techniques keeps
our assembly line under constant control. Parameters such as solder-paste
thickness, component placement, cleanliness, etc. are statistically sampled,
charted and fi ne tuned as necessary. Visual inspections are performed by
trained operators after pick-and-place, soldering and cleaning operations.
Units are 100% electrically tested prior to potting. All devices are temperature
cycled, burned-in, hi-pot tested and fi nal-electrical tested prior to external
visual examination, packing and shipping.
Rapid Response to Problems
DATEL employs an outstanding corrective-action system to immediately ad-
dress any detected shortcomings in either products or processes. Whenever
our assembly, quality or engineering personnel spot a product/process prob-
lem, or if a product is returned with a potential defect, we immediately perform
a detailed failure analysis and, if necessary, undertake corrective actions.
Over time, this system has helped refi ne our assembly operation to yield one
of the lowest product defect rates in the industry.
USA:
Canada:
UK:
France:
Germany:
Japan:
China:
Singapore:
Mansfi eld (MA), Tel: [phone], email: [e-mail]
Toronto, Tel: [phone], email: [e-mail]
Milton Keynes, Tel: [phone], email: [e-mail]
Montigny Le Bretonneux, Tel: [phone], email: [e-mail]
München, Tel: [phone], email: [e-mail]
Tokyo, Tel: [phone], email: [e-mail]
Osaka, Tel: [phone], email: [e-mail]
Shanghai, Tel: [phone], email: [e-mail]
Guangzhou, Tel: [phone], email: [e-mail]
Parkway Centre, Tel: [phone], email: [e-mail]
Technical enquiries email: [e-mail], tel:
25-40W, Single Output, DC/DC Converters
MDC_UMP25-40W_B02 Page 9 of 9
UMP Models
[phone]