TEP 150-2416WI TRACOPOWER, TEP 150-2416WI Datasheet - Page 2

• Manufacturer Part Number: TEP 150-2416WI
• Description: DC/DC CONVERTER, 28V, 150W
• Manufacturer: TRACOPOWER
• Type: Industrialr

Specifications of TEP 150-2416WI

• Dc / Dc Converter O/p Type: Fixed
• No. Of Outputs: 1
• Input Voltage: 9V To 36V
• Power Rating: 150W
• Output Voltage: 28V
• Output Current: 5.4A
• Approval Bodies: UL, EN, IEC
• Supply Voltage: 24V
• Brand/series: TEP 150WI Series
• Configuration: Enclosed
• Mounting Type: Panel
• Number Of Outputs: 1
• Operation: Switching
• Output: 28 V @ 5.4 A
• Primary Type: DC-DC
• Special Features: Ultra-wide 4:1 input voltage range; I/O isolation 2250 VDC (basic insulation);Easy chassis and wall mounting;Overtemperature protection
• Compact Dimensions: 98 × 52 × 34 mm
• Ultra-wide 4: 1 Input Voltage Range
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Input Specifications
Input current (full load)
Input current (no load)
Start-up voltage / under voltage shut down
Surge voltage (100 msec. max.)
Conducted noise (input)
ESD (electrostatic discharge)
Radiated immunity
Fast transient / Surge
Conducted immunity
Reverse voltage protection
Recommended input fuse (slow blow)
Output Specifications
Voltage set accuracy
Output voltage adjustment
Regulation
Temperature coefficient
Minimum load
Ripple and noise (20 MHz Bandwidth)
Start up time (nominal Vin and constant resistive load)
Transient response (25 % load step change)
Output current
Over voltage protection
Short circuit protection
Capacitive load
– With external input capacitor:
– Input variation Vin min. to Vin max.
– Load variation 0 – 100 %
– Constant voltage (CV)
– Constant current (CC)
24 Vin, 24 – 48 VDC models: 120 mA typ.
48 Vin, 24 – 48 VDC models: 70 mA typ.
48 Vin, 12 – 15 VDC models: 60 mA typ.
24 Vin, 12 – 15 VDC models: 80 mA typ.
24 & 28 VDC models: 200 mVpk-pk max.
12 & 15 VDC models: 100 mVpk-pk max.
24 VDC models: Nippon chemi-con KY 470 µF, 50 V, ESR 45 mOhm
48 VDC models: Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm
48 VDC models: 350 mVpk-pk max.
24 VDC models: 10‘000 µF max.
28 VDC models: 7‘600 µF max.
48 VDC models: 2‘600 µF max.
12 VDC models: 40‘000 µF max.
15 VDC models: 26‘000 µF max.
48 Vin models: 3.7 A typ.
48 Vin models: 17.6 VDC / 16.2 VDC typ.
48 Vin models: 100 V
48 Vin models: 10 A
24 Vin models: 7.5 A typ.
24 Vin models: 8.8 VDC / 8.2 VDC typ.
24 Vin models: 50 V
24 Vin models: 15 A
EN 55022 class A, FCC part 15, class A
without external components.
optional filter for class B – ask factory
EN 61000-4-2, air ±8 kV, contact ±6 kV,
perf. criteria A
EN 61000-4-3, 10 V/m, perf. criteria A
EN 61000-4-4, ±2 kV, perf. criteria A
EN 61000-4-5, ±1 kV perf. criteria A
EN 61000-4-6, 10 Vrms, perf. criteria A
parallel diode
±1 %
+20 % by external resistor (see application note)
0.2 % max.
0.4 % max.
±0.02 %/K
not required
25 ms typ. (at power On or remote On)
200 µs typ.
up to 110 % of Iout max.
above 110 % of Iout max.
at 125 –140 % of Vout nom.
indefinite, automatic recovery
DC/DC Converters
TEP 150WI Series 150 Watt
Page 2 of 4