NG 2/S PROXXON, NG 2/S Datasheet
![ADAPTOR, MICROMOT](/photos/21/65/216568/107560005-40_sml.jpg)
NG 2/S
Manufacturer Part Number
NG 2/S
Description
ADAPTOR, MICROMOT
Manufacturer
PROXXON
Datasheet
1.NG_2S.pdf
(1 pages)
Specifications of NG 2/S
Power Supply Output Type
Fixed
Power Rating
24VA
Input Voltage
220VAC To 240VAC
Output Voltage
12V
Output Current
2A
Mounting Type
Desktop
External Depth
95mm
External Length / Height
80mm
External Width
185mm
MICROMOT mains adaptor NG 2/E
Very compact design. NORYL casing (heat resistant -a necessity for
transformer enclosures). Capacity 2,0A at 16 Volt open circuit - and 12
Volt under load = 24VA (DC). Primary supply 220 – 240V. Polarised
socket for MICROMOT plug. Red LED indicates readiness for use. PTC
(Positive temperature coefficient) element prevents overload (and plugged
in tool will not automatically restart). After cooling down, the mains
plug should be disconnected briefly to reset the adaptor. Modern
design with holes for storing bits. Foldable tool rest provides a secure
place for keeping the MICROMOT tool at the ready.
In compact NORYL casing (recommended for transformers). With
superior capacity of 5A at 16V no load and 12 Volt under load = 60
VA (DC). Primary supply 220 – 240V. Thyristor electronic control
(with feedback) for optimum tool speed and high torque at low
speeds.
Three polarised sockets for MICROMOT machines. A pair of
sockets for standard banana plugs (4mm diameter) is also supplied.
Master switch for turning off the transformer without needing to
unplug. Red LED indicates „ready“.
PTC protection against overload (plugged in machine will not
restart automatically. After cooling down, the mains plug should
briefly be unplugged to reset the adapter).
Practical design with storage holes for tools with 2.35mm and
3mm shafts. Foldable tool rest – keeps the MICROMOT tool being
used safely on standby.
No 28 704
MICROMOT mains adaptor NG 5/E
MICROMOT
System
MICROMOT mains adaptors: safe and efficient power sources
for hand operated 12 Volt PROXXON machines
Thyristor electronic speed control (with feedback) for adjusting bit
speed to suit the job, as well as providing high torque at low speeds.
No 28 707
MICROMOT mains adaptor NG 2/S
Exactly as above, without electronic speed control. For 220 - 240V.
No 28 706
NOTE:
Power consumption of portable machine tools is
measured according to the internationally accepted
ICE-745-1 specification. The current drawn is measured,
not the power consumption with a hot motor just
before stalling. In practice, this condition seldom
appears, if ever. All PROXXON mains adaptors are
suitably dimensioned for the recommended purposes.
Adaptors do not include drill.
.
15