TEP-HS1 TRACOPOWER, TEP-HS1 Datasheet
![HEAT SINK](/photos/21/66/216687/4706745_sml.jpg)
TEP-HS1
Specifications of TEP-HS1
Related parts for TEP-HS1
TEP-HS1 Summary of contents
Page 1
... TEP 75WI Series, 75 Watt (Models pictured with chassis mount adaptor and optional heatsink) The TEP-75WI Series is a family of isolated high performance dc-dc converter modules with ultra-wide 4:1 input voltage ranges which come in a rugged, sealed metal case. These converters are suitable for a wide range of applications, but the product is designed particularly also for industrial applications where often no PCB mounting is possible but the module has to be mounted on a chassis ...
Page 2
... Minimum load Remote sense Ripple and noise (20 MHz Bandwidth) Start up time (nominal Vin and constant resistive load) Transient response (25 % load step change) Output current limitation Over voltage protection Short circuit protection Note 1: For operation at low input voltage an input capacitor 4.7µF/50V X7R MLCC or 68µF/100V, 110mOhm Nippon chemi-con KY series is recommended for a reliable supply of the pulse current. Capacitor is already include with chassis mount option – ...
Page 3
... All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com DC/DC Converters TEP 75WI Series 5 VDC models: 30‘000 µF max. 12 VDC models: 5‘250 µF max. 15 VDC models: 3‘330 µF max. 24 VDC models: 1‘330 µF max. ...
Page 4
... Vin models: Output 24–48 VDC 48 Vin models: Output 5–15 VDC 48 Vin models: Output 24–48 VDC http://www.tracopower.com DC/DC Converters TEP 75WI Series Models without heatsink 24 Vin models: Output 5–15 VDC 24 Vin models: Output 24–48 VDC 48 Vin models: Output 5–15 VDC 48 Vin models: Output 24–48 VDC ...
Page 5
... M3 THD (trough hole Bottom view 3 4 0.19 1.90 (4.8) (48.26) 2.28 (57.9) TEP-HS1 Heatsink (pictured with heatsink mounted) 2.28 (57.9) Top view http://www.tracopower.com Weight: 97g (3.42 oz) Pin diameter pin 5 & 9: 0.08 (2.0) Pin diameter other pins: 0.04 (1.0) Order code: TEP-HS1 Includes heatsink with termal pad and mounting screws To order modules with mounted heatsink ask factory ...
Page 6
... Chassis Mount Adaptor TEP 75 module with chassis mount adabtor (suffix –CM or –CMF) For easy chassis mounting the converter modules can be supplied with an adaptor option consisting of a screw terminal connection board (soldered to converter pins)and a chassis mount adaptor. In addition this Chassis mount option is available with an EMI-filter (see EMI specification) Suffix – ...