SDN2.5/20RED SOLA HEVI DUTY, SDN2.5/20RED Datasheet - Page 2

• Manufacturer Part Number: SDN2.5/20RED
• Description: POWER SUPPLY, SWITCH MODE, 24V
• Manufacturer: SOLA HEVI DUTY
• Type: Industrialr

Specifications of SDN2.5/20RED

• Power Supply Type: Switching
• Power Supply Output Type: Fixed
• No. Of Outputs: 1
• Output Voltage: 24V
• Output Current: 20A
• Length: 116mm
• Width: 50mm
• Height: 124mm
• Approval Bodies: CE, CUL, CRUus, EN
• Product: Switching
• Output Power Rating: 120 W
• Output Current (channel 1): 2.5 A
• Dimensions: 116 mm W x 124 mm H
• Brand/series: SDN Series
• Configuration: Enclosed
• Mounting Type: DIN Rail/Panel
• Number Of Outputs: 1
• Operation: Switching
• Output: 24 VDC @ 20 A
• Power, Output: 60, 92, 120, 240, 480 W (Single Phase), 120, 240, 480 W (Three Phase)
• Primary Type: AC-DC
• Special Features: Parallelable, PFC
• Voltage, Input: 85 to 264/90 to 375 VAC/VDC
• Voltage, Output: 24 VDC
• Safe, Rugged Packaging: Fully Enclosed Metal Case
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SDN™ Redundant Series Specifications for SDN2.5-20RED and SDN 30/40RED
By means of a separate redundancy module, you can interconnect several identical SDN power supply units in a N+1 redundant mode. These external
modules decouple the power supply outputs from each other so that, in case of failure, one power supply unit cannot overload the other units. The
modules incorporate DC OK relay contacts. The switch on front of the SDN power supply should be placed in parallel mode (not single mode) when
power supplies are used with redundant module.
Voltage
Voltage Drop
Current Handling Capacity
Inverse Battery Protection
Connection
DC Okay Contacts (qty) description
DC OK LED
-Voltage Set Point
H x W x D - inches (mm)
Free Space for Ventilation -
inches (mm)
Weight lbs (kg)
Ambient Temperature
-Nominal Value
-Max. Rated
-V
-Maximum Value
-Connector size range
-Voltage Set Point
-Contact Rating
in
-> V
out
Description
Storage: -25°C...+85°C Operation: -10°C...+60°C full power with operation to 70°C possible with a
linear derating to half power from 60°C to 70°C (Convection cooling, no forced air required). Operation up
to 50% load permissible with sideways or front side up mounting orientation. The relative humidity is
< 90% RH, noncondensing.
contact Technical Services at [phone] with any questions.
Stranded: 16-12 AWG (1.5 - 4 mm
(1) V
Solid: 16-10 AWG (1.5 - 6 mm
(124 mm x 50 mm x 116 mm)
Visit our website at www.solahd.com or
out
4.88 in x 1.97 in x 4.55 in
Note: GND must be connected to module for voltage monitor to operate properly.
“OK” - N.O. & N.C. Contact
SDN 2.5-20RED
1.38 (625)
Electrical Characteristics
20 A
Catalog Number
Relay Contacts
See Connectors and Wiring diagrams on next page.
Dimensions
Concept
General
Above/Below: 0.39 in. (10 mm) recommended
Power Supplies
Left/Right: 0.39 in. (10 mm) recommended
2
30 Vdc @ 2A / 250 V @ 2A
Via captive screw terminals
)
2
)
V
out
> 18 Vdc ±5%
> 18 Vdc ±5%
“OK” Green LED
Typ. 0.6 V
24 Vdc
35 V
Yes
Stranded: 16-8 AWG (1.5 - 10 mm
Solid: 16-5 AWG (1.5 - 16 mm
(124 mm x 65 mm x 116 mm)
(1) V
(2) V
4.88 in x 2.56 in x 4.55 in
out
in
“OK” - N.O. Contact
“OK” - N.O. Contact
SDN 30/40RED
1.43 (646)
40 A
2
)
2
)
4
115