9421LF1 SQUARE D, 9421LF1 Datasheet - Page 19
![no-image](/images/manufacturer_photos/0/6/626/square_d_sml.jpg)
9421LF1
Manufacturer Part Number
9421LF1
Description
CIRCUIT BREAKERS, ACCESSORIES
Manufacturer
SQUARE D
Datasheet
1.9422ATCF331.pdf
(44 pages)
12/97
Type A1
Handle Dimensions
File E52639
CCN: WHTY2
© 1997 Square D All Rights Reserved
Class 9422 Handle Mechanisms
Handle mechanism kits are used with all disconnect switch and circuit break-
er installations. The kits contain all parts necessary for mounting the handle
to the flange of the enclosure. The Types A1 through A4 and A9 through A10
are suitable for right or left hand flange mounting. Two mounting methods are
offered. The Types A5 through A8 handles are designed for right hand
mounting only
Class 9422 Mounting and Outline Dimensions for
A1, A2, A3, A4, A9, and A10 Handles
All dimensions are shown for right-hand flange mounting. For left-hand
flange mounting, transpose all horizontal dimensions. See page 23 for infor-
mation on A5 through A8 handles.
Dimension X
Dimension X is the distance from the top inside of the enclosure or other
grounded metal parts (such as conduit hubs) to the upper mounting hole of
the handle mechanism (See Panel Drilling diagram). Actual distances are de-
pendent on the disconnect device being used, and should only be deter-
mined once the diconnect device is decided upon and the location on the
panel determined.
Preferred Mounting Method
This method is for 16 Ga. to 0.25” thick enclosures. It consists of mounting
the handle to the outside and the stiffener bracket to the inside of the enclo-
sure and securing with two bolts, as shown in the figure below.
6” HANDLE for use with 30-200 ampere switches and all circuit breaker mechanisms
All external metal parts are either stainless steel or
a chrome-plated non-ferrous die casting.
4” HANDLE for use with 30-200 ampere switches and all circuit breaker mechanisms
12” HANDLE for use with 400 Type TG1 and TG2 disconnect switches ONLY
All external metal parts are either stainless steel or
a chrome-plated non-ferrous die casting.
10” HANDLE for use with Type D2 remote or dual adaptor kit ONLY
For use on NEMA 1, 3, 3R, 4 (sheet steel), and 12 enclosures
For use on NEMA 4 (stainless steel) enclosures
Similar to Type A1
Similar to Type A2
For fixed-depth instllation in NEMA 1, 3, 3R, 4 (sheet steel), and 12 enclosures
For fixed-depth instllation in NEMA 4 (stainless steel) enclosures
Simialr to A5 except for adjustable-depth installation
Similar to A6 except for adjustable-depth installation
Similar to Type A1
Similar to Type A2
Description
Type
A10
A1
A2
A3
A4
A5
A6
A7
A8
A9
19