SMDH160-2 Tyco Electronics, SMDH160-2 Datasheet - Page 3

• Manufacturer Part Number: SMDH160-2
• Description: FUSE, PTC RESET, 16V, 1.6A, 3425
• Manufacturer: Tyco Electronics
• Series: SMD2r
• Type: Polyswitch Resettable Fusesr

Specifications of SMDH160-2

• Holding Current: 1.6A
• Tripping Current: 3.2A
• Initial Resistance Max: 0.15ohm
• Operating Voltage: 16VDC
• Ptc Fuse Case: 3425
• Initial Resistance Min: 0.05ohm
• R Min/max: 0.050 ~ 0.150 Ohm
• Voltage - Max: 16V
• Time To Trip: 15s
• Current - Hold (ih) (max): 1.6A
• Current - Trip (it): 3.2A
• Current - Max: 70A
• Package / Case: 3425
• Hold Current: 1.6 Amps
• Trip Current: 3.2 Amps
• Current Rating (max): 70 Amps
• Resistance: 0.15 Ohms
• Maximum Voltage: 16 Volts
• Termination Style: Solder Pad
• Mounting Style: SMD/SMT
• Current Rating: 70 Amps
• Dimensions: 9.4 mm L x 6.71 mm W x 3 mm H
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: RF1479-000

Raychem Circuit Protection
Step 4.
Time-to-trip is the amount of time it takes for a device to switch to a
high-resistance state once a fault current has been applied across the
device. Identifying the PolySwitch device’s time-to-trip is important in
order to provide the desired protection capabilities. If the device you
choose trips too fast, undesired or nuisance tripping will occur. If the
device trips too slowly, the components being protected may be
damaged before the device switches to a high-resistance state.
Figures S11-S19 show the typical time-to-trip at 20°C for each of the
PolySwitch devices.
If the PolySwitch device’s time-to-trip is too fast or too slow for the
circuit, go back to Step 2 and choose an alternate device.
Step 5.
Ensure that your application’s minimum and maximum ambient
temperatures are within the operating temperature of -40°C to 85°C
(-40°C to 125°C for SMDH160).
Step 6.
Using dimensions in Table S4, compare the dimensions of the
PolySwitch device you selected with the application’s space con-
siderations.
Determine time-to-trip.
Verify ambient operating conditions.
Verify the PolySwitch device dimensions.
PolySwitch Surface-mount Resettable Devices
Surface-mount
189
4