SMD100F-2018-2 Tyco Electronics, SMD100F-2018-2 Datasheet - Page 28

• Manufacturer Part Number: SMD100F-2018-2
• Description: FUSE, PTC RESET, 15V, 1.1A, 2018
• Manufacturer: Tyco Electronics
• Series: MidSMDr
• Type: Polyswitch Resettable Fusesr

Specifications of SMD100F-2018-2

• Holding Current: 1.1A
• Tripping Current: 2.2A
• Initial Resistance Max: 0.4ohm
• Operating Voltage: 15VDC
• Ptc Fuse Case: 2018
• Initial Resistance Min: 0.1ohm
• R Min/max: 0.100 ~ 0.400 Ohm
• Voltage - Max: 15V
• Time To Trip: 0.5s
• Current - Hold (ih) (max): 1.1A
• Current - Trip (it): 2.2A
• Current - Max: 40A
• Package / Case: 2018
• Hold Current: 1.1 Amps
• Trip Current: 2.2 Amps
• Current Rating (max): 40 Amps
• Resistance: 0.4 Ohms
• Maximum Voltage: 15 Volts
• Termination Style: Solder Pad
• Mounting Style: SMD/SMT
• Current Rating: 40 Amps
• Dimensions: 5.44 mm L x 4.93 mm W x 1.52 mm H
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: RF0324-000

4
Part Numbering System
Solder Reflow and Rework Recommendations for Surface-mount Devices
Solder Reflow
• Recommended reflow methods:
• The following product series are
• The following product series are
• Recommended maximum paste
• Devices can be cleaned using
214
IR, Vapor phase, and hot air
oven.
not designed to be wave soldered
to circuit boards:
designed to be wave soldered
to circuit boards:
thickness for the microSMD,
miniSMDC, and miniSMDE
devices is 0.25 mm (10mils),
0.13-0.25 mm for miniSMDM
and nanoSMDM, and 0.38 mm
for SMD.
standard methods and solvents.
TS250
SMD
PolySwitch Surface-mount Resettable Devices
nanoSMDM
miniSMDM
midSMD
SMD
SMD2
TS
nanoSMDC
microSMD
miniSMDC, miniSMDE
150
-130
F
-RA
/33
-B-0.5
-RB
-2
-2
Rework
• Use standard industry practices
Caution:
• If reflow temperatures exceed the recommended profile, devices
2 = Tape and reel packaging
Rx - Resistance range (Limited part number availability)
Alternative voltage rating (If applicable)
Lead free
Hold current indicator
Product series
2 = Tape and reel packaging
Bxx = Resistance matched (Optional)
Rx - Resistance range (Optional)
Hold current (mA)
Product series
for the nanoSMDC,
nanoSMDM, microSMD,
miniSMDC, miniSMDM, and
miniSMDE devices.
may not meet the performance specifications.
300
250
200
100
150
50
0
Preheating
30 to 90
Figure S21
Soldering
10 to 20
Time(s)
• For SMD and midSMD series
and all TS devices rework
should be confined to removal
of the installed product and
replacement with a fresh
device.
Cooling
120
Raychem Circuit Protection