B72590T0040M060 EPCOS Inc, B72590T0040M060 Datasheet - Page 74

• Manufacturer Part Number: B72590T0040M060
• Description: VARISTOR, 0402, 4V
• Manufacturer: EPCOS Inc
• Series: B72590Tr

Specifications of B72590T0040M060

• Suppressor Type: Varistor
• Clamping Voltage Vc Max: 24V
• Peak Energy (10/1000us): 7.5mJ
• Voltage Rating Vdc: 5.5V
• Voltage Rating Vac: 4V
• Operating Temperature Range: -40°C To +85°C
• Svhc: No SVHC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Conductive adhesive gluing
Operation
This listing does not claim to be complete, but merely reflects the experience of EPCOS AG.
Please read Cautions and warnings and
Important notes at the end of this document.
Multilayer varistors (MLVs)
Standard series
Only multilayer varistors (MLVs) with an AgPd termination are approved for conductive
adhesive gluing.
Use CTVS only within the specified operating temperature range.
Use CTVS only within specified voltage and current ranges.
Environmental conditions must not harm a CTVS. Only use them in normal atmospheric
conditions. Reducing the atmosphere (e.g. hydrogen or nitrogen atmosphere) is prohibited.
Prevent a CTVS from contacting liquids and solvents. Make sure that no water enters a CTVS
(e.g. through plug terminals).
Avoid dewing and condensation.
EPCOS CTVS components are mainly designed for encased applications. Under all
circumstances avoid exposure to:
EPCOS CTVS devices are not suitable for switching applications or voltage stabilization where
static power dissipation is required.
Multilayer varistors (MLVs) are designed for ESD protection and transient suppression.
CeraDiodes are designed for ESD protection only, ESD/EMI filters are designed for ESD and
EMI protection only.
direct sunlight
rain or condensation
steam, saline spray
corrosive gases
atmosphere with reduced oxygen content
Page 74 of 75