P-303-CCT-L Cinch Connectors, P-303-CCT-L Datasheet - Page 69
![CONN PLUG 3POS W/LOCK JONES SLDR](/photos/24/72/247220/4079360_sml.jpg)
P-303-CCT-L
Manufacturer Part Number
P-303-CCT-L
Description
CONN PLUG 3POS W/LOCK JONES SLDR
Manufacturer
Cinch Connectors
Series
300r
Specifications of P-303-CCT-L
Connector Type
Plug, Jones
Contact Type
Tab
Number Of Positions
3
Pitch
0.156" (3.96mm)
Number Of Rows
1
Mounting Type
Free Hanging (In-Line)
Fastening Type
Latch Lock
Cable Termination
Solder Eyelet
Wire Type
Discrete
Features
Cable Clamp
Contact Finish
Cadmium
Color
Black
Contact Termination
Solder
No. Of Contacts
3
No. Of Rows
1
Connector Mounting
Cable
Gender
Plug
Contact Material
Brass
Contact Plating
Cadmium
Contact Gender
Pin
Rohs Compliant
No
Housing Material
Thermoplastic
Number Of Positions / Contacts
3
Voltage Rating
250 V
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Contact Finish Thickness
-
Row Spacing
-
Lead Free Status / Rohs Status
No RoHS Version Available
Other names
CJ203P
Press-Fit BNC Coaxial Connector Board Mount
Receptacle for 75 Ω Ω Applications
Body: One-piece diecast zinc per QQ-Z-363
Plating: Nickel, 150µin. min. per QQ-N-290 over copper, 200µin.
Center Contact: Beryllium copper
Plating: Gold, 30µin. minimum over nickel, 50µin. minimum
Insulator: Teflon TFE per ASTM D1710
Connector Insertion Force: <500 lb.*
Connector Removal Force: >100 lb.*
Center Contact Insertion Force: < 2.0 lb.*
Center Contact Removal Force: > 2.0 oz.*
*
mounting holes. PC board thickness can range from .093" to .300" thick.
PC board hole requirements are as follows:
Call Toll Free: 1 (800) 323-9612
Requirements are for two connector insertions into the same PC board
■ Solderless, Press-Fit Installation.
■ Strong, One-Piece Cast Body.
■ Standard BNC Interface.
■ 75Ω Ω Impedance.
■ Meets Lucent Technologies (AT&T) Requirements.
Ground Legs:
Center Contact: .040" Nom.
Insulation Resistance:
Frequency Range:
min. per MIL-C-14550
Working Voltage:
Insertion Loss:
RF Leakage:
Impedance:
.059" Nom.
VSWR:
75Ω
0 to 4 GHz
> -55 dB
.2dB maximum @ 2 GHz
1.024
< 500 VAC RMS @ sea level
> 5000 MOhms @ 500 VDC
2-76
Unique patented press-fit connector design
allows for multiple insertions into a backplane
without loss of mechanical retention or electrical
performance.
The Cinch Press-Fit BNC surpasses these
requirements with a unique, non-symmetrical
ground leg design. This design allows the
connector to be inserted, removed, rotated 180
and reinserted into the same location on the
board without loss of mechanical or electrical
performance.
The design requirements for nominal PC board
mounting holes and thickness are as follows:
For more information please
contact us at 1-800-323-9612
.093 Board Thickness: 200 lb. max.
.250 Board Thickness: 500 lb. max.
.093 Board Thickness: 100 lb. max.
.250 Board Thickness: 200 lb. max.
Pt. No. 299 99 00 134
Compliant version,
is also available.
Withdraw Forces:
Insertion Forces:
o
,