P6KE400CA-E3/54 Vishay, P6KE400CA-E3/54 Datasheet - Page 6

• Manufacturer Part Number: P6KE400CA-E3/54
• Description: TRANSIENT SUPPRESSOR DIODE,SINGLE,BIDIRECTIONAL,342V V(RWM),DO-204AC
• Manufacturer: Vishay
• Series: TransZorb®r

Specifications of P6KE400CA-E3/54

• Voltage - Reverse Standoff (typ): 342V
• Voltage - Breakdown: 380V
• Power (watts): 600W
• Polarization: Bidirectional
• Mounting Type: Through Hole
• Package / Case: DO-204AC, DO-15, Axial
• Polarity: Bidirectional
• Clamping Voltage: 574 V
• Operating Voltage: 342 V
• Breakdown Voltage: 380 V
• Peak Surge Current: 1 mA
• Peak Pulse Power Dissipation: 600 W
• Maximum Operating Temperature: + 175 C
• Minimum Operating Temperature: - 55 C
• Dimensions: 3.6 (Max) mm W x 7.6 (Max) mm L
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: P6KE400CA-E3/73

P6KE6.8 thru P6KE540A
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
APPLICATION NOTE
This P6KE TVS series is a low cost commercial
product for use in applications where large voltage
transients can permanently damage voltage-sensitive
components.
The P6KE series device types are designed in a small
package size where power and space is a
consideration. They are characterized by their high
surge capability, extremely fast response time, and low
impedance, (R
nature of transients, and the variation of the
impedance
impedance, per se, is not specified as a parametric
value. However, a minimum voltage at low current
conditions (BV) and a maximum clamping voltage (V
at a maximum peak pulse current is specified.
www.vishay.com
6
100
0.1
10
0.001
1
Figure 7. Typical Transient Thermal Impedance
0.01
with
on
). Because of the unpredictable
t
p
0.1
respect
- Pulse Duration (s)
[e-mail], [e-mail], [e-mail]
For technical questions within your region, please contact one of the following:
1
to
10
these
100
transients,
1000
0.300 (7.6)
0.230 (5.8)
1.0 (25.4)
1.0 (25.4)
MIN.
MIN.
DO-204AC (DO-15)
c
)
In some instances, the thermal effect (see V
Clamping Voltage) may be responsible for 50 % to
70 %. of the observed voltage differential when
subjected to high current pulses for several duty
cycles,
specification insignificant.
In case of a severe current overload or abnormal
transient beyond the maximum ratings, the Transient
Voltage Suppressor will initially fail 'short' thus tripping
the system's circuit breaker or fuse while protecting the
entire circuit. Curves depicting clamping voltage vs.
various current pulses are available from the factory.
Extended power curves vs. pulse time are also
available.
0.034 (0.86)
0.028 (0.71)
0.140 (3.6)
0.104 (2.6)
DIA.
DIA.
thus
making
a
maximum
Document Number: 88369
Revision: 22-Oct-08
impedance
c