RCLAMP0531T.TCT Semtech, RCLAMP0531T.TCT Datasheet - Page 5

• Manufacturer Part Number: RCLAMP0531T.TCT
• Description: RClamp Bidirectional, Ultra Low Cap TVS For Portable Applications
• Manufacturer: Semtech

Device Connection Options
These low capacitance TVS diodes are designed to
provide common mode protection for one high-speed line
or differential protection for one line pair. The device is
bidirectional and may be used on lines where the signal
polarity is positive and negative.
Circuit Board Layout Recommendations for Suppres-
sion of ESD.
Good circuit board layout is critical for the suppression
of ESD induced transients. The following guidelines are
recommended:
PROTECTION PRODUCTS
© 2011 Semtech Corp.
Applications Information
Place the TVS near the input terminals or connec-
tors to restrict transient coupling.
Minimize the path length between the TVS and the
protected line.
Minimize all conductive loops including power and
ground loops.
The ESD transient return path to ground should be
kept as short as possible.
Never run critical signals near board edges.
Use ground planes whenever possible.
5
Equivalent Circuit Diagram
RClamp0531T
www.semtech.com