RF302 BLACK BOX, RF302 Datasheet - Page 2

• Manufacturer Part Number: RF302
• Description: BEOGE STATIONARY SHELF
• Manufacturer: BLACK BOX

08/13/2010
#23908
FeATures
»
»
»
»
»
»
No assembly required.
Extra wide (48") and extra deep (32")
for accom modating servers and other
large equipment.
Includes two stationary shelves with
a 300-lb. (136.1-kg) capacity each.
PLEXIGLAS front doors and vented
rear doors have 3-point lock and latch.
Top panel has cable-management punch-outs,
plus vented slots for extra cooling.
Constructed with a rugged 14-gauge
folded-steel frame.
724-746-5500
blackbox.com
OVERVIEW
for a complete data-center setup.
14-gauge folded-steel frame. It can hold up to 700 pounds (317.5 kg)
of equipment. The cabinet comes pre assembled, so it’s easy to set up
and use. Cabinet components include: fully louvered rear door, one
pair of solid lift-off side panels, one 16-position power strip with
circuit breaker and 12-ft. (3.7-m) cord, a PLEXIGLAS
two stationary shelves shelves (300-pound capacity each), rubber feet,
and leveling glides. Cabinet measurements are 72"H x 48"W x 32"D
(182.9 x 121.9 x 81.3 cm). Additional features include:
• Top panel has cable-management punch-outs,
• Extra wide (48") and extra deep (32") for accommodating servers
• PLEXIGLAS front doors and vented rear doors have three-point
• Also available is the Elite SC with Installed Dual 19" EIA Mounting
plus vented slots for extra cooling.
and other large equipment.
latch and lock.
Kit, 39U (RF199A-RKMT or RF299A-RKMT). This version of the
cabinet includes 19" EIA mounting rails that fit side by side in
the cabinet. Eight mounting rails are pro vided, and the rails are
adjustable in one-inch horizontal increments. Use the rails for
two- or four-point equipment mounting. The mounting kit also
increases the weight capacity of the cabinet from 700 pounds
(317.5 kg) to 1000 pounds (453.6 kg). Best of all, when you order
the RF199A-RKMT or RF299A-RKMT, we’ll install the Rackmount
Kit in your Elite SC! (Please note that the Elite SC with Dual
Mounting Kit does not include stationary shelves.)
The
The Elite SC is a double-wide cabinet constructed of a rugged
Elite SC and Accessories
provide everything you need
®
front door,
19" EIA Rackmount Kit, 5U
or hubs. This kit gives you an extra 5U for equipment. The kit
includes: (1) 23.5"D stationary shelf, (2) mounting tabs, (2) rails,
(1) support bar, (16) #12-24 screws, and (8) #10 washers.
Shelves
sliding keyboard shelf. The stationary shelf is 44.75"W x 23.5"D
(113.7 x 59.7 cm) and holds up to 300 pounds (136.1 kg). The sliding
keyboard shelf is 42.5"W x 21.5"D (108 x 54.6 cm) and holds up to
35 pounds (15.9 kg). Pull it out when you need to work. Slide it back
in for storage.
Sliding Keyboard Trays
trays to use with multiple keyboards. Just pull out the one you need.
Trays measure 19.5"W x 15.56"D (49.5 x 39.52 cm) and include
16" slides, brackets, and one station ary shelf.
Cable Management
cable-management bars. Horizontal models include 4 cable rings;
vertical models include 6 cable rings.
Fan Assembly and Caster
cools equipment in your cabinet. Each fan moves air at 75 cfm.
This is the perfect accessory for racking only a few patch panels
Two types of shelves are available: a stationary shelf and a
These trays give you either two or four vertically stacked keyboard
Keep your cable organized with optional vertical or horizontal
This panel of three fans with guards exhausts warm air and
Casters provide mobility.
BLACK BOX
®
2 of 3