ELCSOFTGP EATON CUTLER HAMMER, ELCSOFTGP Datasheet - Page 11

• Manufacturer Part Number: ELCSOFTGP
• Description: Software
• Manufacturer: EATON CUTLER HAMMER

Specifications of ELCSOFTGP

• Accessory Type: ELCSoftGP Programming Software
• Lead Free Status / RoHS Status: na

March 2009
Accessories
Ethernet Expansion Module
The HMIECENT expansion module adds 10/100 MB Modbus
TCP ability when plugged into the expansion slot of a 6", 8"
or 10" HMi unit. Up load and download programs and com-
municate to other Modbus TCP devices. No need for patch
or crossover cables as this module auto-detects and adjusts
for proper operation.
Figure 48-7. Ethernet Expansion Module — Product Outline
Table 48-10. HMIECENT Function Specifications
CA08102001E
Item
Power Supply Voltage
Interfaced Supported
Number of Ports
Transmission Method
(Standard Conformance)
Transmission Cable
Transmission Speed
Ethernet Protocol
Noise Immunity
Certifications
Connection Port for
Ethernet
Direct Mounting Hole
HMIECENT Ethernet Expansion Module
Specifications
DC 5V ±10%, 1A (provided by HMi )
RJ-45 with Auto MDI/MDIX
1 Port
IEEE 802.3, IEEE 802.3u
Category 5e (TIA/EIA-568-A, TIA/EIA-568-B)
10/100 Mbps Auto Detection
ICMP, IP, TCP, UDP, DHCP, Modbus TCP
ESD (IEC 61131-2,
IEC 61000-4-2): 8 kV Air Discharge
EFT (IEC 61131-2, IEC 61000-4-4):
Power Line: 2 kV,
Communication I/O: 1 kV
Damped-Oscillatory Wave:
Power Line: 1 kV, Digital I/O: 1 kV
RS (IEC 61131-2,
IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m
C-Tick, cULus, CE
Connection Port for
Extension Module
For more information visit: www.eaton.com
Nameplate
Operator Interface Products
HMi Operator Interface
Software and Accessories
I/O Expansion Modules
The HMIEC0806 and HMIEC1612 are 14 and 28 discrete I/0
expansion modules providing 8 DC inputs and 6 relay out-
puts or 16 DC inputs and 12 relay outputs. Plug this module
into the available expansion slot on the back of the HMi unit
(not available on the 4" model) and it’s ready to use. No need
for a separate PLC controller as it is built into the unit.
Combine operator interface and logic into a single
platform — use HMISOFT to build both the ladder logic
and OI program.
Figure 48-8. I/O Expansion Modules — Product Outline
Table 48-11. I/O Expansion Modules
Catalog
Number
HMIEC0806
HMIEC1612
Direct Mounting Hole
Connection Port
Input/Output
Power
5V DC
supplied
by HMi
Input Unit
Point
16
8
Type
DC Type
Sink or
Source
Input/Output Terminals
Nameplate
Output Unit
Point
12
6
Relay
Relay
Type
48-11
48