RU-MX5 RADIO DESIGN LABS, RU-MX5 Datasheet
RU-MX5
Manufacturer Part Number
RU-MX5
Description
RDL FIVE INPUT MIC/LINE MIXER, INPUT IMPEDANCE: (BALANCED MIC) 150-600 OHM, (UNBALANCED MIC) 5 KOHM, (BALANCED OR UNBALANCED LINE) 10 KOHM, MIC LEVEL OUTPUT: -45 DBU, LINE LEVEL OUTPUT: DBU AT 150 OHM, MIC FREQUENCY RESPONSE: 70 HZ-
Manufacturer
RADIO DESIGN LABS
Datasheet
1.RU-MX5.pdf
(3 pages)
RACK-UP
Model RU-MX5
Audio Mic/Line Mixer
ANYWHERE YOU NEED...
•
•
•
•
•
•
You Need The RU-MX5!
The RU-MX5 is part of the group of RACK-UP products from Radio Design Labs. RACK-UPs feature the
advanced circuitry for which RDL products are known, combined with accessible user-friendly controls and
displays. The ultra compact design permits high-density installations, with three products mounted in a
single rack unit! Single RACK-UPs can be mounted right where they are needed using the adhesive
method popularized by RDL’s STICK-ON
RACK-UP module above, below, or in front of any flat surface!
APPLICATION: The RU-MX5 is the ideal choice in many applications where a combination of mic and/or
line level signals need to be mixed. All connections are made using full-size barrier block terminals on the
rear panel.
Four of the RU-MX5 inputs can accept either mic or line level inputs. The fifth input is for line level only.
Mic inputs are designed for low-impedance balanced microphones, though high-impedance unbalanced
mics can be connected as well. Jumpering a rear-panel terminal can selectively connect an internally
provided 24 Vdc phantom voltage to any, or all, of the mic inputs. All line-level inputs permit the connection
of either balanced or unbalanced, high or low impedance audio lines.
A separate unbalanced MIX input allows an external audio source to be summed directly into the mix
amplifier, bypassing the front-panel level controls. This feature can be used to cascade multiple mixers to
expand system capabilities.
The RU-MX5 provides two balanced outputs, one at mic level and the other at line level. Either of these
outputs may be unbalanced if required. Both outputs may be used at the same time.
Audio levels are adjustable on the front panel. A convenient write-on label area is provided above each
fader knob.
Three LED indicators provide output level metering. Audio presence is indicated by the -20 indicator. 0 dB
shows usual audio levels, and a +5 dB LED displays audio peaks. The metering section is peak-reading
and refers 0 dB to a balanced audio output of +4 dBu.
Wherever a mixer is needed to provide superior audio clarity, user adjustments, reliability, compactness
and unsurpassed versatility, the RU-MX5 is the ideal choice. Use the RU-RA3 rack-mount adapter to
mount multiple mixers, or to combine related products (such as audio or video distribution, or audio
metering) into a single rack unit!
A Mic or Line Level Audio Mixer
5 Channels of Audio Mixing
A Mixer with Output Level Indicators
Mic Mixing with Phantom Capability
Expandable Mixing Capabilities
1/3-Rack, High-Density Rack Mounting
RDL
•
659 N. 6
®
SERIES
th
St.
•
Prescott, AZ., USA 86301
®
series of products. Optional brackets permit mounting a
•
(928) 443-9391
•
FAX (928) 443-9392
•
www.rdlnet.com
Related parts for RU-MX5
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
AUDIO VISUAL (AUDIO VIDEO)
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL AUTOMATIC LEVEL CONTROL, POWER REQUIREMENTS: 24 VDC, 80 MA, IMPEDANCE: 10 KOHM, TERMINAL TYPE: SCREW, FEATURES: IT MAINTAINS A CONSISTENT DBU OUTPUT FOR INPUT SIGNAL VARIATIONS AS GREAT AS 25 DB
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL POWER SUPPLIES, OUTPUT CURRENT: 400 MA, OUTPUT VOLTAGE: 24 VDC, FEATURES: SINGLE ENDED, DESIGNED SPECIFICALLY FOR USE WITH ALL RDL MODULES
Manufacturer:
RADIO DESIGN LABS
Part Number:
Description:
RDL AUDIO DISTRIBUTION AMPLIFIER, GAIN: -15- DB, FEATURES: INPUT AND OUTPUT CONNECTIONS ARE MADE VIA A FULL SIZE SCREW TERMINAL STRIP, ON THE REAR PANEL AND ACCEPT ANY COMBINATION OF BALANCED OR UNBALANCED WIRING CONFIGURATIONS
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL AUDIO DISTRIBUTION AMPLIFIER, POWER REQUIREMENTS: 24-30 VDC FLOATING OR 12-15 VDC BIPOLAR SUPPLY, 50 MA, APPLICATIONS: DISTRIBUTION WITH UP TO 3 OUTPUTS, BRIDGING A LINE FOR LOCAL DISTRIBUTION, DISTRIBUTION WITH IMPEDANCE CONVERS
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL UNIVERSAL AUDIO MIXER, POWER REQUIREMENTS: 24-33 VDC, 60 MA, APPLICATIONS: MIXING OF TWO AUDIO SOURCES. CONVERTS MONO LINE LEVEL SIGNALS FROM CONSUMER TO PROFESSIONAL, OR FROM PROFESSIONAL TO CONSUMER FORMAT
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL LINE LEVEL MIXING AMPLIFIER, POWER REQUIREMENTS: 24-30 VDC FLOATING OR 12-15 VDC BIPOLAR, 55 MA, NUMBER OF CHANNELS: 3, GAIN: -14- DB, FEATURES: OUTPUTS FROM MULTIPLE UNITS MAY BE CONNECTED IN PARALLEL TO FORM A MULTI CHANNEL MIX
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL TWO-WATT UTILITY AMPLIFIER, NUMBER OF OUTPUTS: 2, FREQUENCY RESPONSE AT 600 OHM: 20 HZ-30 KHZ, FREQUENCY RESPONSE AT 8 OHM: 35 HZ-30 KHZ, THD: .5 %, INPUT: 10 KOHM, -15 DBV (LINE LEVEL), POWER REQUIREMENTS: 24-33 VDC, 150 MA, GRO
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL SIX-WATT UTILITY AMPLIFIER, FREQUENCY RESPONSE: 35 HZ-20 KHZ, THD: .35 %, INPUT: 10 KOHM, 400 MV (LINE LEVEL), POWER REQUIREMENTS: 24-33 VDC, 350 MA, GROUND REFERENCED, NUMBER OF CHANNELS: 1
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL ELECTRONIC TRANSFORMER PAIR, POWER REQUIREMENTS: 24-30 VDC FLOATING OR 12-15 VDC BIPOLAR, CURRENT RATING: 50 MA, NUMBER OF CHANNELS: 2, FEATURES: BRIDGING INPUTS, ADJUSTABLE GAIN OR ATTENUATION AND LOW IMPEDANCE OUTPUTS
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL AUDIO LINE AMPLIFIER, NUMBER OF CHANNELS: 1, POWER REQUIREMENTS: 24-30 VDC FLOATING OR 12-15 VDC BIPOLAR, CURRENT RATING: 50 MA, DIMENSIONS: (H X W X D) 1.55 X 3X .65
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL MICROPHONE PREAMPLIFIER, POWER REQUIREMENTS: 24-33 VDC, 25 MA, FEATURES: OUTPUT IS ADJUSTABLE FROM 35-65 DB GAIN. SEPARATE PHANTOM POWER SUPPLY, UP TO 48 VDC, UNIT MAY BE OPERATED WITH SUPPLY AS LOW AS 9 VDC, WITH REDUCED HEADROO
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL UNIVERSAL AUDIO ATTENUATOR, NUMBER OF CHANNELS: 2, APPLICATIONS: CONVERT 8 OHM, 25 V OR 70 V SPEAKER OUTPUT TO 600 OHM INPUT, FEATURES: UTILIZES DUAL 15 TURN POTENTIOMETERS FOR PRECISE, INDEPENDENT ADJUSTMENT OF EACH CHANNEL
Manufacturer:
RADIO DESIGN LABS
Datasheet:
Part Number:
Description:
RDL BRIDGING INPUT TRANSFORMER, FREQUENCY RESPONSE: 20 HZ-20 KHZ, THD: .05 %, INPUT IMPEDANCE: 10 KOHM, FEATURES: ADD TRANSFORMER ISOLATION TO ANY LINE LEVEL INPUT, PROVIDES BALANCED INPUT AND OUTPUT
Manufacturer:
RADIO DESIGN LABS
Datasheet:
RU-MX5 Summary of contents
Page 1
... All connections are made using full-size barrier block terminals on the rear panel. Four of the RU-MX5 inputs can accept either mic or line level inputs. The fifth input is for line level only. Mic inputs are designed for low-impedance balanced microphones, though high-impedance unbalanced mics can be connected as well ...
Page 2
... GND terminal directly below the +24V Terminal. Power supply ground and circuit ground are common. • th • RDL 659 N. 6 St. Prescott, AZ., USA 86301 RU-MX5 Rear Panel View • • (928) 443-9391 FAX (928) 443-9392 • www.rdlnet.com ...
Page 3
... RACK-UP ® SERIES Model RU-MX5 Audio Mic/Line Mixer TYPICAL PERFORMANCE Inputs: Input Impedance: Line Level Output: Mic Level Output: Gain: Frequency Response: External Phantom Power: Total Harmonic Distortion: Headroom: Metering: Noise: Power Requirements: U.S.A. (800) 933-1780, (928) 778-3554; Fax: (928) 778-3506 Europe [NH Amsterdam] (++31) 20-6238 983 ...