6D316 4D SYSTEMS, 6D316 Datasheet - Page 3

• Manufacturer Part Number: 6D316
• Description: CARRIER BOARD, UOLED, CD-128-G1
• Manufacturer: 4D SYSTEMS

Specifications of 6D316

• Accessory Type: Carrier Board For µOLED-128-G1
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: µOLED-128-G1

Attaching the Display Module
The following images illustrate various ways of
attaching the uOLED-128-G1(SGC) and the uOLED-
128-G1(GFX) display modules to the CB-128-G1
carrier board.
1
2
3
4
© 2009 4D Systems
CB-128-G1
The Bare Board
Display Module Directly Soldered
Display Module via Sockets
Interfacing the uUSB-MB5/CE5
www.4dsystems.com.au
Joystick Circuit
The The Joystick is a 5 position multi switch and
each position connects to a junction of a resistor
ladder network that forms a voltage divider.
uOLED-128-G1(SGC) Serial Display: The output of
the Joystick connects directly to the SWITCH pin.
Each Joystick position is interpreted as 1 of 5
buttons or switches.
uOLED-128-G1(GFX) 4DGL Display: The output of
the Joystick voltage divider connects directly to
the IO1 pin. The IO1 pin can be programmed as an
Analogue to Digital (A2D) converter input under
4DGL. Utilising the A2D feature, each individual
switch position voltage value can be read and
decoded. The IO1 pin of the display modules are
directly connected to the output of the joystick
voltage divider circuit.
Joystick Circuit
Note: The uOLED-128-G1(SGC) (Serial platform)
and the uOLED-128-G1(GFX) (4DGL platform)
display modules are both similar electrically and
mechanically.
Data Sheet
Page 3 of 6