PC1602LRS-HWB-H-Q POWERTIP, PC1602LRS-HWB-H-Q Datasheet - Page 23
![LCD MODULE, 16X2, STN, LED, E/TEMP](/photos/22/50/225041/42269989_sml.jpg)
PC1602LRS-HWB-H-Q
Manufacturer Part Number
PC1602LRS-HWB-H-Q
Description
LCD MODULE, 16X2, STN, LED, E/TEMP
Manufacturer
POWERTIP
Datasheet
1.PC1602LRS-HWB-H-Q.pdf
(24 pages)
Specifications of PC1602LRS-HWB-H-Q
No. Of Digits / Alpha
32
Character Count X Line
16 X 2
Character Size
9.66mm
Supply Voltage
5V
Display Area Width
99mm
Display Area Height
24mm
Operating
RoHS Compliant
Display Mode
Transflective
5. PRECAUTION RELATING PRODUCT HANDLING
5.4 TERMS OF WARRANTY
PC1602LRS-HWB-H-Q Rev.A (DK)
5.1 SAFETY
5.2 HANDLING
5.3 STORAGE
5.1.1
5.1.2
5.2.1
5.2.2
5.2.3
5.2.4
5.2.5
5.2.6
5.2.7
5.2.8
5.2.9
5.3.1
5.3.2
5.3.3
5.4.1
5.4.2 Unaccepted responsibility
If the LCD panel breaks , be careful not to get the liquid crystal to touch your skin.
If the liquid crystal touches your skin or clothes , please wash it off immediately by
Avoid any strong mechanical shock which can break the glass.
Avoid static electricity which can damage the CMOS LSI—When working with the
Do not remove the panel or frame from the module.
The polarizing plate of the display is very fragile. So , please handle it very
Do not wipe the polarizing plate with a dry cloth , as it may easily scratch the
Do not touch the display area with bare hands , this will stain the display area.
Do not use ketonics solvent & aromatic solvent. Use with a soft cloth soaked with
To control temperature and time of soldering is 320±10℃and 3-5 sec.
To avoid liquid (include organic solvent) stained on LCM .
Store the panel or module in a dark place where the temperature is 25℃ ±5℃
Do not place the module near organics solvents or corrosive gases.
Do not crush , shake , or jolt the module.
Applicable warrant period
module , be sure to ground your body and any electrical equipment you may be using.
using soap and water.
carefully ,do not touch , push or rub the exposed polarizing with anything harder
than an HB pencil lead (glass , tweezers , etc.)
surface of plate.
a cleaning naphtha solvent.
and the humidity is below 65% RH.
The period is within thirteen months since the date of shipping out under normal
using and storage conditions.
This product has been manufactured to your company’s specification as a part for
use in your company’s general electronic products. It is guaranteed to perform
according to delivery specifications. For any other use apart from general
electronic equipment , we cannot take responsibility if the product is used in
nuclear power control equipment , aerospace equipment , fire and security
systems or any other applications in which there is a direct risk to human life
and where extremely high levels of reliability are required.
Page23