6D326 4D SYSTEMS, 6D326 Datasheet - Page 14

• Manufacturer Part Number: 6D326
• Description: DISPLAY, TOUCH, W/CNTRL, ULCD32PTSGC
• Manufacturer: 4D SYSTEMS

Specifications of 6D326

• Viewing Area (h X W): 48.6mm X 64.8mm
• Supply Voltage: 5V
• Illumination Colour: Red / Green / Blue
• Display Mode: QVGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7.
The uLCD-32PT(SGC) module uses off the shelf
standard microSD memory cards.
For
operations, before the memory
card can be used it must first be
formatted with FAT16 option.
The formatting of the card can
be done on any PC system with
a card reader. Select the
appropriate drive and choose
the FAT16 (or just FAT in some systems) option
when formatting. The card is now ready for use.
The module also support high capacity HC
memory cards (4Gb and above). The available
capacity of SD-HC cards varies according to the
way the card is partitioned and the commands
used to access it.
The FAT partition is always first (if it exists) and can
be up to the maximum size permitted by FAT16.
Windows will format FAT16 up to 2Gb and the
Windows command prompt will format FAT16 up
to 4Gb.
For the RAW partition, byte reads and writes can
access 2^32 (i.e. 4gb) of the card, Sector reads and
writes can access 2^24 sectors (of 512 bytes, i.e.
8gb).
The total amount of the card usable is the sum of
the FAT and RAW partitions.
© 2010 4D Systems
µLCD-32PT(SGC)
Memory Cards – FAT16 Format
any
FAT
file
related
www.4dsystems.com.au
8.
•
•
•
•
•
•
•
Display Precautions
Avoid having to display the same image/object
on the screen for lengthy periods of time. This
will cause a burn-in which is a common
problem with all types of display technologies.
Blank the screen after a while or dim it very
low by adjusting the contrast. Better still;
implement a screen saver feature.
Moisture and water can damage the display.
Moisture on the surface of a powered display
will cause the electrodes to corrode. Wipe off
any moisture gently or let the display dry
before usage.
Dirt from fingerprint oil and fat can easily
The performance of the display will degrade
Do not tamper with the display flex cable that
Displays are susceptible to mechanical shock
Always use the mounting holes on the
stain the surface of the display. Gently wipe
off any stains with a soft lint-free cloth.
under high temperature and humidity. Avoid
such conditions when storing.
is connected to the control board. This may
effect the connection between the display
and the driving circuitry and cause failure.
and any force exerted on the module may
result in deformed zebra strips, a cracked
display cell and broken back-light
module's printed circuit board to mount the
display.
Data Sheet
Page 14 of 23