DD-12864YO-5A DENSITRON, DD-12864YO-5A Datasheet - Page 16

• Manufacturer Part Number: DD-12864YO-5A
• Description: DISPLAY, OLED, 128X64, YELLOW
• Manufacturer: DENSITRON

Specifications of DD-12864YO-5A

• Screen Size: 68.58mm
• Resolution: 128 X 64
• Viewing Area (h X W): 32.69mm X 63.41mm
• Pixel Size (h X W): 0.45mm X 0.45mm
• Voltage Rating: 2.8V
• External Depth: 3.3mm
• External Length / Height: 41.86mm
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Connector Type: EVK
• Interface Type: Parallel, Serial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5 FUNCTIONAL SPECIFICATION
5.1 COMMANDS
5.2 POWER UP/DOWN SEQUENCE
To protect panel and extend the panel lifetime, the driver IC power up/down routine should
include a delay period between high voltage and low voltage power sources during turn
on/off. It gives the panel enough time to complete the action of charge and discharge
before/after the operation.
5.3 RESET CIRCUIT
Product No.
Copyright ©2006 DENSITRON TECHNOLOGIES plc. All rights reserved. – Proprietary Data
When RES# input is low, the chip is initialized with the following status:
Please refer to the Technical Manual for the SSD1325
1. Display is OFF
2. 128x80 Display mode
3. Normal segment and display data column and row address mapping (SEG0 mapped to
column address 00H and COM0 mapped to row address 00H)
4. Shift register data clear in serial interface
5. Display start line is set at display RAM address 0
6. Column address counter is set at 0
7. Normal scan direction of the COM outputs
8. Contrast control register is set at 80H
9. Normal display mode (Equivalent to A4h command)
5.2.1 POWER UP SEQUENCE
5.2.2 POWER DOWN SEQUENCE
1. Power up V
2. Send Display off command
3. Initialization
4. Clear Screen
5.Power up V
6. Delay 100ms
(when VDD is stable)
7. Send Display on command
1. Send Display off command
2. Power down V
3. Delay 100ms
4. Power down V
(When V
completely discharges)
PP
DD-12864YO-5A
CC
reach 0 and panel is
DD
CC
DD
REV. A
V
V
SS
SS
Ground
V
Ground
V
DD
V
V
Display off
Vcc
DD
DD
ON V
CC
CC
ON
V
Display On
CC
Page
off
V
16 / 25
DD
off