DD-9664FC-2A DENSITRON, DD-9664FC-2A Datasheet - Page 29

• Manufacturer Part Number: DD-9664FC-2A
• Description: DISPLAY, OLED, RGB, 96X64
• Manufacturer: DENSITRON

Specifications of DD-9664FC-2A

• Screen Size: 24.13mm
• Resolution: 96 X 64
• Viewing Area (h X W): 15.42mm X 22.14mm
• Pixel Size (h X W): 0.19mm X 0.05mm
• Voltage Rating: 2.8V
• External Depth: 1.5mm
• External Length / Height: 22.2mm
• External: RoHS Compliant
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Connector Type: EVK-Connect
• Interface Type: Parallel, Serial

10 HANDLING PRECAUTIONS
Safety
If the panel breaks, be careful not to get the organic substance in your mouth or in your eyes.
If the organic substance touches your skin or clothes, wash it off immediately using soap and plenty of
water.
Mounting and Design
Place a transparent plate (e.g. acrylic, polycarbonate or glass) on the display surface to protect the
display from external pressure. Leave a small gap between the transparent plate and the display
surface.
Design the system so that no input signal is given unless the power supply voltage is applied.
Caution during OLED cleaning
Lightly wipe the display surface with a soft cloth soaked with Isopropyl alcohol, Ethyl alcohol or
Trichlorotriflorothane.
Do not wipe the display surface with dry or hard materials that will damage the polariser surface.
Do not use aromatic solvents (toluene and xylene), or ketonic solvents (ketone and acetone).
Caution against static charge
As the display uses C-MOS LSI drivers, connect any unused input terminal to V
input any signals before power is turned on.
Also, ground your body, work/assembly table and assembly equipment to protect against static
electricity.
Packaging
Displays use OLED elements, and must be treated as such. Avoid strong shock and drop from a
height.
To prevent displays from degradation, do not operate or store them exposed directly to sunshine or
high temperature/humidity.
Caution during operation
It is indispensable to drive the display within the specified voltage limit since excessive voltage
shortens its life.
Other Precautions
When a display module is operated for a long of time with fixed pattern may remain as an after image
or slight contrast deviation may occur.
Nonetheless, if the operation is interrupted and left unused for a while, normal state can be restored.
Also, there will be no problem in the reliability of the module.
Storage
Store the display in a dark place where the temperature is 25°C ± 10°C and the humidity below
50%RH.
Store the display in a clean environment, free from dust, organic solvents and corrosive gases.
Do not crash, shake or jolt the display (including accessories).
DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED
Product No.
DD-9664FC-2A
REV. A
REV.
DD
or V
Page
SS
. Do not
29 / 29