6D302 4D SYSTEMS, 6D302 Datasheet - Page 45

• Manufacturer Part Number: 6D302
• Description: OLED DISPLAY 160x128PIXELS 33.6mmx27mm
• Manufacturer: 4D SYSTEMS

Specifications of 6D302

• Screen Size: 42.92mm
• Resolution: 160 X 128
• Viewing Area (h X W): 33.6mm X 27mm
• Interface Type: Serial, USB
• Voltage Rating: 5V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.4.8
Syntax :
extCmd : 40
cmd : 49
x : Screen horizontal start position (top left corner)
y : Screen vertical start position (top left corner)
width : horizontal size of the Image/Icon
height : vertical size of the Image/Icon
colourMode : 8
SectorAddress
stored Image or an Icon that is about to be displayed.
Description :
screen that has been previously stored at a particular sector address in the
memory card. The screen position of the image to be displayed is specified by
(x, y) and the size of the image by width and height parameters.
If the previously stored image was in 8 bit colour format (1 byte per pixel) or 16
bits (2 bytes per pixel) then this must be specified in the colourMode byte
parameter. Do not store an image/icon in one colour format then display it in
another colour format, this will result in a corrupted image display.
Notes:
Display Image/Icon from Memory Card
The Copy Screen to Memory Card command always stores that part of the
screen as a 16 bit image, i.e. 2 bytes per pixel.
The images or icons when stored into the memory card must be sector
boundary aligned, i.e. the object start location must be at the start of a
sector boundary.
hex
extCmd, cmd, x, y, width, height, colourMode,
SectorAddress
, I
hex
ascii
This command displays a bitmap image or an icon on to the
16
, @
(hi:mid:lo)
dec
dec
ascii
= 256 colour mode, 8bits/1byte per pixel
= 65K colour mode, 16bits/2bytes per pixel
www.4dsystems.com.au
: A 3 byte memory card sector address of a previously
(hi:mid:lo)
(@I)
45