ZB4BV04 TELEMECANIQUE, ZB4BV04 Datasheet - Page 4

• Manufacturer Part Number: ZB4BV04
• Description: LENS HEAD, BA 9S
• Manufacturer: TELEMECANIQUE
• Type: Incandescent/LED/Neonr

Specifications of ZB4BV04

• Base Type: BA9S
• Colour: Red
• Panel Cutout Diameter: 22mm
• Color: Red
• Color, Lens: Red
• Lamp Type: Incandescent/LED/Neon
• Lens Color: Red
• Lens Style: Round
• Mount Method: Flush
• Mounting Hole Size: 22 mm
• Mounting Size: 22 mm
• Mounting Type: Flush
• Primary Type: Pilot Light
• Special Features: Relampable
• Ul, Csa And Ce Marked&tab;&tab; Required For A Complete Switch: &tab;&tab;&tab
• Lamp Base Type: BA9s

Printed Circuit Board Cut-outs (Viewed from Electrical Block Side)
Dimensions in mm
A:
B:
Dimensions in in.
A:
B:
General Tolerances of the Panel and Printed Circuit Board
The cumulative tolerance must not exceed 0.3 mm / 0.012 in: T1 + T2 = 0.3 mm max.
Installation Precautions
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.
4
30 mm min.
40 mm min.
1.18 in. min.
1.57 in. min.
● Minimum thickness of circuit board: 1.6 mm / 0.06 in.
● Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004
● Orientation of body/fixing collar ZB4 BZ009: ± 2
● Tightening torque of screws ZBZ 006: 0.6 N.m. max.
● Allow for one ZB4 BZ079 fixing collar/pillar and its fixing screws:
○ every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y).
○ with each selector switch head (ZB4 BD•, ZB4 BJ•, ZB4 BG•).
°
30’ (excluding cut-outs marked a and b).