DL1882 OSRAM, DL1882 Datasheet - Page 39
![LAMP, DULUX, L, I, 18W](/photos/22/63/226326/42463380_sml.jpg)
DL1882
Manufacturer Part Number
DL1882
Description
LAMP, DULUX, L, I, 18W
Manufacturer
OSRAM
Datasheet
1.DD1082.pdf
(82 pages)
Specifications of DL1882
Supply Voltage
58V
Base Type
4 Pin
Power Rating
18W
Luminous Flux
1150lm
Length
217mm
Colour Temperature Typ
2700K
Svhc
No SVHC (15-Dec-2010)
External Diameter
17.5mm
External Length / Height
217mm
Lamp Base Type
4 Pin
Rohs Compliant
Yes
Bulb Diameter
17.5mm
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Economical long-life light sources with plug-in bases.
Compact Fluorescent Lamps OSRAM DULUX
Technical Guide
38
3.2.3 Operation of
OSRAM DULUX
S/E, D/E and T/E
with external
starter and CCG
®
OSRAM DULUX
cally for operation with conventional control gear. Integrated in their bases is a special-
ly developed glow starter that has been adapted to the particular requirements of
these compact fluorescent lamps. OSRAM DULUX
bases are intended for operation with electronic control gear, and hence without a star-
ter. Generally, it is possible to operate OSRAM DULUX
18 W and 26 W only) with conventional control gear and an external starter under nor-
mal operating conditions. However, there is no starter currently available on the market
that has been designed specifically for this purpose (see also 6.3).
In this mode, considerable limitations can therefore be expected, such as greatly
reduced lamp life with lamp glass blackening on the electrode side and longer
ignition times. For this reason, this mode of operation is not recommended or
supported by OSRAM.
OSRAM DULUX
55 and 80 W lamps are approved only for ECG operation owing to their high arc
voltages.
®
®
S, D and T lamps (with two-pin bases) have been designed specifi-
T/E 32 W, 42 W, 57 W and 70 W lamps and OSRAM DULUX
®
®
S/E, D/E and T/E with four-pin
®
S/E, D/E and T/E lamps (13 W,
3. Circuits
®
L 40,