DRAGONPUCK/OS/DP3/B1 OSRAM SYLVANIA, DRAGONPUCK/OS/DP3/B1 Datasheet - Page 2

• Manufacturer Part Number: DRAGONPUCK/OS/DP3/B1
• Description: LED LIGHT MODULE, 3 LED, BLUE
• Manufacturer: OSRAM SYLVANIA
• Series: DRAGONpuckr

Specifications of DRAGONPUCK/OS/DP3/B1

• Led Module Type: Board + LED
• Led Color: Blue
• Wavelength Typ: 470nm
• Power Module Configuration: Circular
• Forward Current @ Test: 350mA
• Power Rating: 3.6W
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

OSRAM SYLVANIA
National Customer
Service and Sales Center
18725 N. Union Street
Westfield, IN 46074
Industrial Commercial
Phone: [phone]
Fax:
National Accounts
Phone: [phone]
Fax:
OEM/Specialty Markets
Phone: [phone]
Fax:
Display/Optic
Phone: [phone]
Fax:
In Canada
OSRAM SYLVANIA LTD.
Headquarters
2001 Drew Road
Mississauga, ON L5S 1S4
Industrial Commercial
Phone: [phone]
Fax:
Special Markets
Phone: [phone]
Fax:
Visit our website: www.sylvania.com
1-800-255-5043
1-800-562-4674
1-800-762-7192
1-800-762-7192
1-800-667-6772
1-800-667-6772
Dimensions
Safety Information
Application and Assembly Information
1. The mounting of the module is facilitated by means of a M3x8 (8mm) screw, which fits to a threaded hole in the
2. The module should be in good thermal contact with the designed metallic mounting service. Use of an
3. Installation of the DRAGONpuck and HFDisk must include provisions for appropriate thermal management to avoid
4. Once heat is transferred to a “heatsink” it still must be allowed to escape the “system”. The assembly should be
1. LED module must maintain good contact with heatsink for the necessary thermal management of the LED module.
2. The maximum operating temperature of the Tc point (up to 85°C) is to specify the absolute maximum Tc temperature
3. 50K hour service life for a Tc of 40°C
Parameter
Operating Temperature at Tc-Point
Storage Temperature
Maximum Allowable Current (dc)
Maximum Reverse Voltage
Maximum Ratings For Heatsink Assembly
(See assembly information for more details)
without causing permanent damage to the LED module.
rear of the DRAGONpuck and HFDisk housing. Mounting screws are provided with the heatsink assembly.
appropriate heatsink compound is recommended to eliminate air gaps. T Putty-504, manufactured by
Lairdtech (www.lairdtech.com) has been tested and meets the conditions of our thermal management tests.
premature failure of the product and to obtain expected service life. Service life (i.e. lumen depreciation) is primarily a
function of LED temperature which is to be monitored on the circuit board at the designated “Tc-Point”.
located in an area that can provide adequate ventilation and it should be kept away from other direct sources of
heat. A heatsink transferring the thermal energy to the inside of the enclosed cavity may ultimately be of little use.
WARNING: ONLY QUALIFIED PERSONNEL SHOULD PERFORM INSTALLATION.
TO AVOID ELECTRICAL SHOCK OR COMPONENT DAMAGE, DISCONNECT POWER BEFORE
ATTEMPTING INSTALLATION OF THE POWER SUPPLIES AND/OR MODULES.
Failure to install the power supplies and/or LED modules in accordance with the National Electric Code (NEC),
all applicable Federal, State and local electric codes as well as the specific Underwriter’s Laboratories (UL) safety
standards for the installation, location and application may cause serious personal injury, death, property damage
and/or product malfunction. These instructions are guidelines for installation of OSRAM LED modules and power
supplies. Installation requirements may vary depending on the application. Licensed electricians should provide all
installation services for connection of both primary and secondary (input/output) of the power supplies.
The LED Module incorporates no protection against short circuits, overload or overheating. Therefore it is
absolutely necessary to operate the modules with an electronically stabilized power supply offering protection
against the above mentioned safety risks.
OSRAM OPTOTRONIC power supplies are specifically designed with protection features for safe operation.
When using power supplies other than OPTOTRONIC the following basic safety features are required in addition to
any other application specific concerns and local safety codes:
• Short circuit protection
• Overload protection
• Overheat protection
• Correct output voltage, including consideration for ripple and spikes.
OSRAM is a registered trademark of OSRAM GmbH.
DRAGONpuck and SYLVANIA are registered trademarks of OSRAM SYLVANIA Inc.
Temperature
Ambient
70° (21°)
80° (27°)
90° (32°)
°F(°C)
LED Module Operating Temp
-30…+85°C (-22…+185°F)
-30…+85°C (-22…+185°F)
115° (46°)
131° (55°)
Tc-Point
97° (36°)
°F (°C)
350 mA
Rating
0 V
LED Module
Life Rating,
hrs
50K
45K
40K
1, 2, 3