H11B1 Vishay, H11B1 Datasheet - Page 6

• Manufacturer Part Number: H11B1
• Description: OPTOCOUPLER, PHOTO DARLINGTON, 5300VRMS
• Manufacturer: Vishay

Specifications of H11B1

• No. Of Channels: 1
• Optocoupler Output Type: Photodarlington
• Input Current: 50mA
• Output Voltage: 30V
• Opto Case Style: DIP
• No. Of Pins: 6
• Mounting Type: Through Hole
• Isolation Voltage: 5.3kV
• Number Of Channels: 1
• Input Type: DC
• Voltage - Isolation: 5300Vrms
• Current Transfer Ratio (min): 500% @ 1mA
• Voltage - Output: 25V
• Current - Output / Channel: 100mA
• Current - Dc Forward (if): 60mA
• Vce Saturation (max): 1V
• Output Type: Darlington with Base
• Package / Case: 6-DIP (0.300", 7.62mm)
• Forward Current: 60 mA
• Maximum Input Diode Current: 60 mA
• Maximum Reverse Diode Voltage: 3 V
• Output Device: Darlington With Base
• Configuration: 1
• Maximum Collector Emitter Voltage: 30 V
• Maximum Collector Emitter Saturation Voltage: 1000 mV
• Maximum Forward Diode Voltage: 1.5 V
• Maximum Collector Current: 100 mA
• Maximum Power Dissipation: 260 mW
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 55 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current Transfer Ratio (max): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 751-1277-5; H11B1GI; H11B1GI

H11B1, H11B2, H11B3
Vishay Semiconductors
OZONE DEPLETING SUBSTANCES POLICY STATEMENT
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with
It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone
depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use
within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in
the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively.
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do
not contain such substances.
customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall
www.vishay.com
288
Parameters can vary in different applications. All operating parameters must be validated for each customer application by the
indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any
respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.
(EPA) in the USA.
claim of personal damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
We reserve the right to make changes to improve technical design
For technical questions, contact: [e-mail]
Optocoupler, Photodarlington
and may do so without further notice.
with Base Connection
Output, High Gain,
Document Number: 83609
Rev. 1.6, 10-Dec-08