LMR4270EW-WCB DENSITRON, LMR4270EW-WCB Datasheet - Page 28

• Manufacturer Part Number: LMR4270EW-WCB
• Description: LCD MODULE, 64X240, BLUE
• Manufacturer: DENSITRON

Specifications of LMR4270EW-WCB

• Lcd Display Type: STN
• Pixel Size (h X W): 0.49mm X 0.49mm
• Display Mode: Transmissive
• Interface Type: Serial
• Viewing Area (h X W): 39mm X 133mm
• Supply Voltage: 5V
• External Depth: 16mm
• External Length /: RoHS Compliant
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Backlighting Colour: White
• Pixel Pitch (h X W): 0.53mm X 0.53mm

The command is convenient for sending a full screen of data from the external display RAM. After
setting Auto mode, a Data Write (or Read) command is need not be sent between each datum. A Data
Auto Write (or Read) command must be sent after a Set Address Pointer command. After this command,
the address pointer is automatically incremented by 1 after each datum. In Auto mode, the T6963C
cannot accept any other commands.
The Auto Reset command must be sent to the T69963C after all data has been sent, to clear Auto mode.
(Note)A Status check for Auto mode
(STA2, STA3 should be checked between sending of each datum. Auto Reset should be performed
after checking STA3=1 (STA2=1.) Refer to the following flowchart.
Page
28 / 47
DENSITRON TECHNOLOGIES plc. – PROPRIETARY DATA – ALL RIGHTS RESERVED