LTST-C171KRKT Lite-On Electronics, LTST-C171KRKT Datasheet - Page 9
![LED LAMP](/photos/8/6/80623/ltst-c171tbkt_ltst-c171kgkt_ltst-c171krkt_sml.jpg)
LTST-C171KRKT
Manufacturer Part Number
LTST-C171KRKT
Description
LED LAMP
Manufacturer
Lite-On Electronics
Specifications of LTST-C171KRKT
Package / Case
0805 (2012 Metric)
Viewing Angle
130°
Color
Red
Millicandela Rating
54mcd
Current - Test
20mA
Wavelength - Dominant
631nm
Wavelength - Peak
639nm
Voltage - Forward (vf) Typ
2V
Lens Type
Clear
Lens Style/size
Rectangle, 1.4mm x 1.25mm
Size / Dimension
2.00mm L x 1.25mm W
Height
0.80mm
Mounting Type
Surface Mount
Resistance Tolerance
631nm
Led Size
2 mm x 1.25 mm
Illumination Color
Red
Lens Color/style
Water Clear
Operating Voltage
2 V
Wavelength
631 nm
Luminous Intensity
54 mcd
Mounting Style
SMD/SMT
Operating Current
20 mA
Lens Shape
Rectangular
Maximum Operating Temperature
+ 85 C
Minimum Operating Temperature
- 55 C
Peak Wavelength
639 nm
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Luminous Flux @ Current - Test
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
160-1427-2
LTSTC171KRKT
LTSTC171KRKT
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
LTST-C171KRKT
Manufacturer:
LITEON
Quantity:
40 000
Part Number:
LTST-C171KRKT
Manufacturer:
LITEON/光宝
Quantity:
20 000
BNS-OD-C131/A4
Part No. : LTST-C171KRKT
1. Application
2. Storage
3. Cleaning
4. Soldering
5. Drive Method
6. ESD (Electrostatic Discharge)
Static Electricity or power surge will damage the LED.
Suggestions to prevent ESD damage:
(A) Recommended circuit.
The LEDs described here are intended to be used for ordinary electronic equipment (such as office
equipment, communication equipment and household applications).Consult Liteon’s Sales in advance
for information on applications in which exceptional reliability is required, particularly when the failure
or malfunction of the LEDs may directly jeopardize life or health (such as in aviation, transportation,
traffic control equipment, medical and life support systems and safety devices).
The storage ambient for the LEDs should not exceed 30°C temperature or 70% relative humidity.
It is recommended that LEDs out of their original packaging are IR-reflowed within one week.
For extended storage out of their original packaging, it is recommended that the LEDs be stored in a
sealed container with appropriate desiccant, or in a desiccators with nitrogen ambient.
LEDs stored out of their original packaging for more than a week should be baked at about 60 deg C
for at least 24 hours before solder assembly.
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED if necessary.
Recommended soldering conditions:
An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs
connected in parallel in an application, it is recommended that a current limiting resistor be incorporated
in the drive circuit, in series with each LED as shown in Circuit A below.
(B) The brightness of each LED might appear different due to the differences in the I-V characteristics
Pre-heat
Pre-heat time
Peak temperature
Soldering time
Use of a conductive wrist band or anti-electrostatic glove when handling these LEDs.
All devices, equipment, and machinery must be properly grounded.
Work tables, storage racks, etc. should be properly grounded.
Use ion blower to neutralize the static charge which might have built up on surface of the LED’s
plastic lens as a result of friction between LEDs during storage and handling.
of those LEDs.
Reflow soldering
Circuit model A
120~150°C
120 sec. Max.
270°C Max.
10 sec. Max.
LITE-ON TECHNOLOGY CORPORATION
LED
P r o p e r t y o f L i t e - O n O n l y
Pre-heat
Pre-heat time
Solder wave
Soldering time
CAUTIONS
Wave Soldering
100°C Max.
60 sec. Max.
260°C Max.
10 sec. Max.
Circuit model B
LED
Temperature
Soldering time
Page :
Soldering iron
9
300°C Max.
3 sec. Max.
(one time only)
of
11